1. Catalogs
  2. GIL
  3. Depósito Delantero

Depósito Delantero

Depósito Delantero

Depósito Delantero

Product catalog summary
Technical Specifications
The document outlines the technical characteristics of a front tank system used in agricultural machinery. The tanks are available in three capacities: 1,100 L, 1,500 L, and 1,900 L. Each tank is made from high-density polyethylene and features a high elastic limit steel chassis with grit treatment and polyurethane paint. Additional features include an auxiliary clean water tank (126 L) and a hand basin (15 L).
Dimensions and Weight
The tanks have a consistent length of 1,288 mm and width of 2,188 mm, with varying heights and weights depending on the capacity:
  • 1,100 L: 974 mm height, 282 kg weight
  • 1,500 L: 1,205 mm height, 302 kg weight
  • 1,900 L: 1,424 mm height, 323 kg weight
Hydraulic System
The system includes a centrifugal pump with a hydraulic drive, providing a flow rate of 780 L/min for both rear and front tank loading.
Hitch and Options
The front tank is equipped with a Category II front tripuntal hitch. Optional features include transport lights, LED lights, a 5 m loading pipe, a 10 m tanks connection pipe, storing wheels, and a front protector.
Additional Features
The tank system includes a 3-way electric valve with a cabin switch for agitation-transfer and a charge socket with a non-return valve.
Contact Information
For further inquiries, contact Julio Gil Águeda e Hijos, S.A. at Ctra. M-118, km 4,100, 28814 Daganzo de Arriba (MADRID), Tel.: (+34) 91 884 54 29/ 91 884 54 49, Fax: (+34) 91 884 14 87, e-mail: [email protected].
See more

Catalog excerpts

Depósito Delantero-1

Depósito Delantero Calidad rentable

 Open the catalog to page 1
Depósito Delantero-2

Depósito Delantero Bomba centrífuga accionamiento hidráulico con un caudal de 780 L/min (carga depósito trasero y delantero). Centrifugal pump hydraulic drive with a flow rate of 780 L/min (rear and front tank load). Entraînement hydraulique à pompe centrifuge avec un débit de 780 L/min (charge du cuve arrière et avant). Depósito delantero en polietileno de alta densidad con chasis en acero de alto límite elástico con tratamiento de granalla y pintura poliuretano, depósito auxiliar agua limpia (126 L) y lavamanos (15 L), capacidades depósitos delanteros de 1.100, 1.500 y 1.900 L. Front tank in...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.