“Make your machine more employable / profitable with the GMT 035 felling grapple” The felling grapple GMT 035 can be used by any machine that can handle a normal wood grapple. All this without having to do any technical modifications. Because of the patented valve block, there is no need for extra hydraulic lines and / or electric cables. The felling grapple GMT 035 has the following benefits: • Enlarge the employability of your machine • Fast cycle of operation, so usable near roads, railroads and in (public)parks • Save up to 60% of man-hours • Thanks to the saw cut there is no damage on the stem or tree trunk • Remove or prune / shear / cut trees safely and efficiently

Max width with open grapple 950 mm Min width with closed grapple 700 mm Height at load position 500 mm Length sawing blade Sawing chain Max felling diameter Chain oil tank capacity Sawmotor Gierkink Machine Techniek BV Kapelweg 44 7134 RJ Vragender the Netherlands Tel +31 544 - 370315 Fax +31 544 - 370316 www.gierkinkmt.nl [email protected] Gierkink Machine Techniek BV reserves the right to information / sizes change.