GH HILCOFELEX AGRO EXTRA
1 / 2Pages

Catalog excerpts

GH HILCOFELEX AGRO EXTRA - 1

GH Hilcoflex Agro Extra Agricultural hose with rubberized lining and jacket MATERIAL CONSTRUCTION Jacket lining: Warp: High-tenacity polyester, reinforced design AT A GLANCE Standard lengths 100 m Weft: Polyamide/polyester; circular woven The special jacket construction ensures outstanding adhesion, tight bending radii and much lower pressure loss compared to a 100% polyester jacket lining Other lengths available on Very little elongation under pressure thanks to a special weaving and vulcanization process request (possibly with cutting fee) Totally embedded in the rubber, offering optimum protection against mechanical damage Rubberized lining and jacket: Very high-grade NBR/PVC compound, extruded through the weave in a special one-step production process Special additives in the compound guarantee outstanding resistance to aging and ozone (Specifications apply to Water) Standard colors black Inside: Very smooth for minimal pressure loss Outside: Reinforced cover and strong longitudinal ribs for extremely high abrasion resistance Areas of application Irrigation, especially pivot systems Liquid manure distribution Sludge and wastewater distribution  Unbeatable resistance to aging and ozone Transport hose for watering and drainage  Outstanding abrasion resistance, even on difficult ground surfaces  Very good resistance to fertilizers, agricultural chemicals and microorganisms For especially heavy-duty work  Very high tensile strength, low pressure loss and elongation  Excellent adhesion between the rubber and jacket lining  Tough and durable Gollmer & Hummel GmbH

Open the catalog to page 1
GH HILCOFELEX AGRO EXTRA - 2

PRESSURES Working pressure: Specifications apply only to the hose (medium water, 20 °C). The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly. For compressed air, the maximum working pressure is 25% of the burst pressure. Maximum working pressure: Approval can only be given by the manufacturer upon clarification of the exact area of application. Specifications apply only to the hose. The potential working pressure may be lower than specified above for hose lines with couplings due...

Open the catalog to page 2

All Gollmer & hummel catalogs and technical brochures

  1. GH P-FLEX M

    2 Pages

  2. GH TITAN 2F

    2 Pages