RANGE R6 | R8
1 / 12Pages

MOUNTED PLOUGHS MULTI-POSITION WORKING WIDTH

R6 | R8 MOUNTED REVERSIBLE PLOUGHS High perfomance, tough, efficient! RANGE R The experience from the RW6 and RW8 ranges led Gregoire-Besson to decline, develop and use its expertise on the R6 and R8, multi-position ploughs with adjustable working width, from 3 to 7* bodies. * according to model, equipment and configuration These ploughs have been designed to be reliable and robust. Shock absorber 0 Slotted and inclined top link hole 0 RH Headstock • RH 615 for R6 - 0115 mm shaft • RH 830 for R8 - 0130mm shaft • 2 tapered conical bearings with the same diameter • Mechanical inclination...

Front furrow adjustment Front furrow width and plough alignment : 100% independent adjustments • Adapted to all inter-tyre distance. • First body is erased. • Regular ploughing in sloping grounds. • Controlled working width. • Perfect ploughing in all conditions.. • Front furrow adjustment on parallelogram, mechanical or hydraulic (optional), independent from plough alignment adjustment. © • Mechanical adjustment of plough alignment, independent from iifront furrow adjustment. • Hydraulic plough alignment with automatic closing/opening during turnover (standard) The traction point of...

The range R6 is characterized by its simple and robust design for maximum versatility. With a 140x140 mm beam, 0 115 mm shaft and fixed coupling cat III N, this plough is perfectly adapted to tractors with lift capacity of 7 tonnes and more. STRAIGHT BEAM «Z» DESIGNED FRAMEFUNCTION SELECTOR • Assemblies in 3 and 4 furrows require a straight beam. • With wheel positioned at rear, load transfer is optimized. • Optimum wheel positioning • Not overhanging 22» wheel (Wheel track is ‘taken out’) • Optimal load transfer • Precise depth adjustment • Stability and road comfort The plough requires...

STANDARD EQUIPMENT R6 0 115 mm shaft Frame 140 x 140 mm 3 to 5 furrows (6 furrows with safety device Cr & B) Shearbolt safety device «Cr» and «B» or auto-reset hydraulic protection «Y» Bolted elements with easy change of working width by means of toothed index. For tractors from 90 to 180 hp. Weights and HP requirements only indicative, subject to variations following options and type of soil. Interbody clearance : 100 cm l Safety device Y l Headstock RHS 115 l Wheel RTT10 11,5/80x15,3 Body D2 with H5 mouldboards l Mixed skimmers.

The range R8 is characterized by its simple and robust design for maximum versatility. With a 160x160 mm beam and 0 130 mm shaft, this plough is perfectly adapted to tractors with lift capacity of 9 tonnes and more. STRAIGHT BEAM «Z» DESIGNED FRAMEFUNCTION SELECTOR • Assemblies in 3 and 4 furrows require a straight beam. • With wheel positioned at rear, load transfer is optimized. • Optimum wheel positioning • Not overhanging 22» wheel (Wheel track is ‘taken out’) • Optimal load transfer • Precise depth adjustment • Stability and road comfort The plough is adapted to tractors disposing of 3...

STANDARD EQUIPMENT R8 0 130 mm shaft Frame 160 x 160 mm 5 to 6 furrows (7 furrows with safety device Cr & B) Shearbolt safety device «Cr» and «B» or auto-reset hydraulic protection «Y», «X» or «Z» Bolted elements with easy change of working width by means of toothed index. For tractors from 120 to 250 hp Weights and HP requirements only indicative, subject to variations following options and type of soil. Interbody clearance : 100 cm l Safety device Y l Headstock RHS 830 l Wheel RTT10 11,5/80x15,3 Body D2 with H5 mouldboards l Mixed skimmers.

SAFETY DEVICES Hard conditions Sécurité C SAFETY DEVICE TYPE CR Shearbolt • Light safety device: low point pressure capacity, for use in easy soil conditions • Configuration until 6 furrows in RC6 and 7 furrows in RC8 • Straigth leg SAFETY DEVICE TYPE X SAFETY DEVICE TYPE B • Mounted on 4 independent ball bearings allowing both vertical and lateral movement • Mounted on double linking rods • Articulation axle assemblied with grease fitting SAFETY DEVICES TYPE Y AND Z Mounted on 4 independent ball bearings allowing both vertical and lateral movement Mounted on double linking rods...

90 r r r r lo r lo' r lo I r

GREGOIRE-BESSON depth control wheels A full range DEPTH WHEEL Gregoire-Besson has developped a full range of depth wheels to meet all required needs and enable the use of the mounted reversible ploughs in all conditions. Thanks to the beam shape and leg offset, the depth wheel is now combining the lateral and rear positions to optimize the weight transfer, giving a better depth control and eliminating the wheel track. RLBM / RLBH Pneumatique : 320 x 60 - 12

GRÉGOIRE-BESSON WEARING PARTS The simpliest way to achieve high output For its wearing parts, Gregoire-Besson uses the best technologies to reach higher quality. Parts are designed to be easy to pull, long-lasting, to ensure penetration and lead to top-of-the-range ploughing. Genuine Gregoire-Besson wearing parts : use what you have paid for ! Example : Genuine Gregoire-Besson 3-holes point : “2 Kg purchase, 400g junk, 80% used !” REINFORCED SHARE / CARBIDE Genuine reinforced share, allowing ploughing without point where appropriate MOULDBOARDS Large choice to suit all conditions. Short or...

GRÉGOIRE-BESSON UK LIMITED Spalding Road - Bourne - Lincs. PE10 0AU. UNITED KINGDOM GRÉGOIRE-BESSON ITALIA GRÉGOIRE-BESSON CANADA INC 4480, Rue Martineau - St Hyacinthe (P. Québec) - J2R 1V1 CANADA P (1) 450 799 56 15 # (1) 450 799 56 29 @ info@gregoirebesson.ca w ca.gregoire-besson.com GRÉGOIRE-BESSON POLSKA Sp.zo.o. Kowanówko | ul. Obornicka 1a - 64-600 Oborniki POLSKA P 61 297 75 30 # 61 297 22 62 @ gbesson@poczta.onet.pl w pl.gregoire-besson.com ООО «ГРЕГУАР-БЕССОН ВОСТОК» 308006, г.Белгород, ул. Корочанская 132 А, RUSSIA P +7 (4722) 402-210 # +7 (4722) 402-210 @ info@gbvostok.ru w...