Range SP9 SINGLE-WHEELED SEMI-MOUNTED PLOUGHS

Semi-mounted ploughs Manoeuvrability, sturdiness, ergonomics RANGe SP 9 The know-how and experience from Gregoire-Besson allows the SP range to be reliable and adaptable. An ideal plough for high output. Typical turnover Pivoted headstock Compact frame, «Z» designed Rack-and-pinion system • Gregoire-Besson exclusivity • Reliability proven during several World Records • More than 15 000 units already in service Smooth use • No shocks during turnover • Movement can be reversed or stopped at any time without risk • Articulated rear wheel can be steered • Constant turnover speed • 110° turning angle...

A large wheel • Large diameter to easily pass over obstacles • Large width for better lift capacity and improved stability • Wheel tractor profile to work in the most difficult conditions • Hydropneumatic suspension Configuration adapted to your needs A complete and modern range • Extension : up to 2 additional furrows • Gregoire-Besson exclusivity : one additional furrow mounted on front frame, to optimize weight transfer whatever the number of plough bodies • Adjustable working width (multi-position element support bracket) or hydraulic variable width • Disc coulter (optional equipment) • Hydraulic...

Semi-mounted ploughs Manoeuvrability, sturdiness, ergonomics RANGe SP 9 Gregoire-Besson offers today the largest range of singlewheeled ploughs, resulting from years of testing and customer listening. - From 5 to 9 furrows - Mechanical or hydraulic working width adjustment - In-furrow or on land ploughing • In-furrow ploughing • Front furrow adjustment (slide) • «Double-armed» wheel mounting bracket • Wheel diameter: from 1000 to 1220 mm • Inner distance between tyres: –– Min.: 1,20 m –– Max.: 1,80 m • In-furrow ploughing • Front furrow adjustment (compass) • «Single-armed» wheel mounting bracket:...

SPMF S - SPMFW S / SPML S - SPMLW S Weights and HP requirements only indicative, subject to variations following options and type of soil

Power control in all circumstances Hard conditions Safety device type B Safety device type X • 2 x shearbolts • Choice of shearbolt strength : 8.8 or 10.9 • Pivot point positioned vertically from the point For extreme conditions, system without lateral tripping • Point pressure capacity from 700 to 2800 kg • Ground clearance : 78 cm Safety device type Y Auto-reset hydraulic safety device Z Gregoire-Besson exclusivity • Mounted on 4 independent ball bearings allowing both vertical and lateral movement • Point pressure capacity from 620 to 1600 kg • Articulation axle assemblied with grease fitting...

Genuine Gregoire-Besson wearing parts The simpliest way to achieve high output For its wearing parts, Gregoire-Besson uses the best technologies to reach higher quality. Parts are designed to be easy to pull, long-lasting, to ensure penetration and lead to top-of-the-range ploughing. Genuine Gregoire-Besson wearing parts : use what you have paid for! Example : Genuine Gregoire-Besson 3-holes point : “2 Kg purchase, 400g junk, 80% used !” Reinforced share / carbide Genuine reinforced share, allowing ploughing without point where appropriate Large choice to suit all conditions. Short or long, plain...

GB.SP9.0113.EN.pt - Photographies non contractuelles. Les poids, et caractéristiques ne sont donnés qu’à titre indicatif et sont non contractuels. GREGOIRE-BESSON UK LIMITED Spalding Road Bourne Lincs. PE10 0AU - England Tel : 01778 423787 Fax. : 01778 394431 [email protected] GRÉGOIRE-BESSON CANADA INC 4480, Rue Martineau St Hyacinthe (P. Québec) J2R 1V1 - Canada Tel (1) 450 799 56 15 [email protected] GREGOIRE-BESSON GmbH Am Rabewerk 1 D - 49152 Bad Essen - Germany Tel (+49) 5472-771 0 / (+49) 5472-771 190 E-mail : [email protected] ГРЕГУАР-БЕССОН ВОСТОК Россия 308006 г....