GT 300 The new special class: 3-row, trailed elevator harvester
10Pages

HARVESTING SUCCESS! The new special class: 3-row, trailed elevator harvester

GT 300: the new performance class The new trailed elevator harvester GT 300, harvests innovative share depth guidance TERRA-CONTROL, one row more with every pass. Advantage – this which is gentle to the harvest and maximising simply means 50 % more performance! The yield – and thanks to the separators MULTISEP operator has a clear view of the digging units and and the high-performance double MULTISEP , the large sieving areas due to the proven frame harvesting is possible on any type of soil. and drive design. Grimme ensures the highest Harvest success with the GT 300, because it impact...

For your maximum success: the new MAXI-Bed system Basically there is a difference between harvested in the fall with a two-row two cultivation systems, the traditional machine. Allied to this, vegetables former BF 300, the soil separator system to plant the potatoes in rows 1.8 m wide beds. With the new system. With the latter method, two MAXI-Bed system, a 2.7 m wide bed rows are planted into a previously is formed and three rows of potatoes are planted in it. For this new system, MAXI-BED SYSTEM Advantages of the MAXI-Bed system 1. 10 % higher net cultivation surface and hence higher...

MAXI-BED SYSTEM Grimme machines for a new cultivation system: the MAXI-Bed! The MAXI-Bed places proven system steps onto a new, wide basis. Machines widths are aligned during bed forming , via separating (1) and planting (2) all the way to the harvest. They provide 50 % more surface yield during each work sequence. CS 240 (1): Sieve the stones and crush the clods: This gives an evenly aerated bed and will provide optimal growth conditions for potatoes and other vegetables – and this in a whole new width. GL 33 T (2): The new 3-row planter for the planting of potatoes in 3-row bed.

Combining the proven and the new: 4-row planting and 3-row harvesting Real life shows that it works: 4-row planting with GPS technology (1) ensures exact, even row spacing. This ensures harvesting in 3 rows. Harvesting with the offset system: the tractor drives over 2 instead of 3 rows (2), the GT 300 continues offset behind the tractor and therefore harvests an additional row to the left of the tractor. Avoid lateral forces on the machine: The wide tractor track (3) drives over 3 rows, the GT 300 follows centered behind the tractor. Grimme offers you the alternative: Usually, potatoes that...

Individual solutions in a new dimension! Different weather conditions, different soil types, a number of potato varieties and many, many more factors. – Briefly said: Harvesting conditions change from one harvest to the next. If looking for more than standard solutions, the GT 300 offers the right answer: Equip the machine according to the requirements and move up to the new 3-row performance class. Harvest success – with 50 % more performance! 11 Cable conduit to protect the electric cables and hydraulic hoses 1st main web with agitator models Swing frame with intake unit Haulm roller...

SIEVING SUPPORT The GT 300 is standard equipped with a rotor agitator (1). A swing agitator (2) is available as an option for a more gentle screening process. The combination of a spiral segment roller with a double haulm roller into one haulm system (option) (3) ensures that the potatoes are not separated against the bars of the main web but against a soft spiral segment roller. S E PA R A T O R S For universal use: the 4-lip spiral segment rollers are standard for the MULTISEP 4-Lip-Spiral-Segment. For difficult harvesting conditions: the 3-lip spiral segment rollers with a lip height of...

TRANSFER ELEVATOR Deep unloading – high flexibility: the innovative transfer technique Evenly good: the transfers in the elevator. A two-piece transfer web, consisting of a long and a short supply web (1) warrants a steady and even fill of the 1.2 m wide transfer elevator or a highperformance transfer. A very gentle feeding. Highest possible flexibility. And 160 t/h feed performance! – This makes the cart elevator of the GT 300 so special. The active lateral parts as well as the length and flexibility of the elevator One step better: Due to the length of the cart elevator, high transport...

MACHINE CONTROL With the VC 50 control terminal (B), all adjustments can be comfortably and intuitively made via a touch screen. The intelligent electronics offers the opportunity to directly analyse and repair faults. The additional GBX box (C) can be freely programmed. Thus, the axle steering or the levelling of the machine can be adjusted via the joysticks. Respond faster: The option CAN bus controlled video surveillance system VISUAL-PROTECT allows an all-round functional monitoring of the harvester. If there is a problem with the machine, the monitor will automatically switch to the...

Technical data Your Grimme Partner for advice and service: GRIMME HARVESTING SUCCESS! Grimme Landmaschinenfabrik GmbH & Co. KG • Hunteburger Strafce 32 • D-49401 Damme Phone +49 5491 666-0 • Fax +49 5491 666-2298 grimme@grimme.de • www.grimme.com We reserve the right of alterations. L05.0917.EN 02/10/1000