HARVESTING SUCCESS! Modular construction harvester with side and centre discharge

Grimme windrowers have been used for years - everywhere. In order to meet the growing demands regarding performance and gentle harvest handling, we have developed the new WR200. Its modular design combines the proven digging units from the SE family with different separating units. With a long main web and centre discharge, the machine is specifically designed for areas, where potato harvesting is still “genuinely” manual labour intensive. With additional haulm separation and the centre discharge, it is mainly used for the 2-phase harvesting process, where the potatoes’ skin becomes more durable during...

For increased operator comfort or if there is a limited number of controllers on the tractor, Grimme offers an operating terminal (1). Ability to work a lot better without pressure. And digging: With the mechanical ridge pressure regulation (2), clods are kept to a minimum and potato damage is prevented. -Ideal in sandy or heavy soils. For more agility on the headland or correction on inclines, the axle steering (3) is an especially thoughtful option. For increased ground clearance, the WR200 can be lifted out via hydraulic cylinders installed on both sides. Additional block valves ensure that...

MACHINE MODULES 1 WR200 with a long, continuous main web. Especially important for many export markets: the gentle transfer over a width of 130 cm 2 WR200 with a main web (a), followed by an extracting unit (b), haulm web (c) and centre discharge via a contra rotating hedgehog web (d) over a discharge width of 50 cm. Ideal for 2-phase harvesting with the 1-row potato harvester WR200 with 1st main web (a) and 2nd extended main web (b) with rotor agitator (c). Two active double scraper rollers (d) ensure a gentle centre discharge for the 2-phase harvesting system. The pressure roller (e) evens...

The WR200 with its long main web deposits the potatoes into a swath featuring a width of approx. 130 cm (1). Afterwards, they are picked up by hand. In 2-phase (split) harvesting processes, the WR 200 deposits the potatoes into a swath featuring a width of approx. 50 cm (2). Following a drying phase, during which the potatoes’ skin become set, they are then picked up by a 1-row harvester. 2+2=4: The economical alternative to the 4-row harvester. The WR 200 in its enriched process. The potatoes are picked up by a 2-row potato harvester (3). The fine haulm elevator (4) on the WR 200 for increased haulm...

Technical data No claims can be raised in respect of texts, illustrations, technical specifications, dimensions and weights, equipment as well as performance specifications. They are approximate and non-binding. Changes in the course of technical enhancement are possible at any time. o Series • Option Not possible Your Grimme Partner for advice and service: GRIMMEHARVESTING SUCCESSl Grimme Landmaschinenfabrik GmbH & Co. KG Hunteburger Strafce 32 • 49401 Damme • Germany • Phone +49 5491 666-0 Fax +49 5491 666-2298 • [email protected] • www.grimme.com