1. Catalogs
  2. Group Schumacher
  3. Chopping TECHNOLOGY

Chopping TECHNOLOGY
1 /7Pages

Chopping TECHNOLOGY

Chopping TECHNOLOGY
1 /7Pages

Catalog excerpts

Chopping TECHNOLOGY-1

Chopping TECHNOLOGY

 Open the catalog to page 1
Chopping TECHNOLOGY-2

radura® straw chopper knife | High-Performance Longer service life Standard chopper blades Induction hardened cutting edges Chopper blades are exposed to high wear that is particularly extreme on the outer ends, leaving them to round off and become dull. radura® hard-faced blades The back surface is harder than the front ࡯ Not so radura® blades. On these blades the back surface is harder than the front (beaver teeth effect), front side ࡯ For a consistently high quality of chop Straight blade ࡯ which creates a consistently sharp mating edge. back side Edges begin to round off due to wear The cutting...

 Open the catalog to page 2
Chopping TECHNOLOGY-3

High air velocity along the swath lines throws the material far and wide Twisted blade Up to 9m spreads without active spreader Twisted radura® Paddle blades accelerate the air stream through the chopper and hence the material flow. With the cutting edges pointing to opposite directions, the straw and chaff are distributed evenly across the full swath width. Optimum results are achieved at 6.50m+ work widths. Air flow rate (m/sec.) radura® straw chopper knife | High-Performance Paddle knives Straight blades Blade position on the shaft ࡯ Homogeneous spreading ࡯ Simplifies the successive soil cultivation...

 Open the catalog to page 3
Chopping TECHNOLOGY-4

Increase your harvest success Straw chopper knives are prawn to high wear and have to be replaced regularly. High degrees of wear cause negative impacts on the harvest success. Example worn straw chopper knives: ࡯ ࡯ ࡯ ࡯ 6 radura® PARTS Increased fuel needs Insufficient fanning of the straw Slow rotting of the straw Insufficient straw distribu

 Open the catalog to page 4
Chopping TECHNOLOGY-5

radura® fits. Reliably. radura® online product finder The straw chopper knife portfolio contains all common knife types. How it works ࡯ radura.info: Choose your straw chopper knife according to machine type and toothing radura® is multifaceted. radura® fits. radura® is save. ࡯ Choose your type of blade ࡯ Combine knives and counter knives ࡯ Choose the complete set for your straw chopper shaft ࡯ radura.info offers the matching counter knife or complete sets ࡯ radura.info offers alternative products, e.g. High-Performance knives Straw chopper knife variants

 Open the catalog to page 5
Chopping TECHNOLOGY-6

radura® fits. Reliably. radura® online product finder Narrow down the results step by step, until you have found the fitting spare part. A click on the product and you get a full information sheet with all the technical data. All radura® parts are available at your agricultural dealer.

 Open the catalog to page 6

All Group Schumacher catalogs and technical brochures

  1. ARISSTA

    6  Pages

  2. Hedge Trimmer

    11  Pages

  3. CROP LIFTER

    13  Pages

  4. Cutting force

    36  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.