Catalogs >
GSI Group >
VERSALOOP™

VERSALOOP™
1 / 4Pages

Catalog excerpts

EASY TO OPERATE. LOW MAINTENANCE. “We are using our first VersaLoop™ to fill a 1226 dryer from a wet holding tank. It is set up to start and stop under a load, and we have not experienced any issues with this type of setup.” “We have ordered another VersaLoop to fill a new bin from our existing chainloop. The beauty of the direct drive gearbox is there are no belts to adjust. This requires less service than the traditional belt driven grain pump we have. Employee safety is a big issue on this operation, and the VersaLoop helps tremendously in this matter.” Tom Burnham, Burnham Brothe

Open the catalog to page 2

VERSALOOP ™ UPGRADING THE WAY YOU MOVE GRAIN • All serviceable parts are located at drive end, allowing easy access in service situations and eliminating the need to climb multiple bins in horizontal applications. Common service parts across other product lines • Drive end and non-drive end can be used in either an inlet or outlet configuration • Horizontal installation option, extending up to 325 feet long, giving you the flexibility to expand your storage system, with limited trussing required • Low maintenance direct drive extends the life of the conveyor GSI’s VersaLoop™ round tube...

Open the catalog to page 3

OPTIONS AND ACCESSORIES INLET OPTIONS DISCHARGE OPTIONS BYPASS INLET Used in situations when the inlet is located between the drive and the non-drive end of the VersaLoop™ (can only be used in horizontal applications). INLET HOPPER Standard hopper available up to 15°, flared hopper is used for all applications above 15°. CHAIN MAINTENANCE SECTION HEAD GATE Used in drop-through applications. Will work on the drive end or the non-drive end. Installed between the drive end and non-drive end, replacing a section of top tube to gain access to the chain for servicing and checking chain tension....

Open the catalog to page 4