TG 231
8Pages

COMPOST TURNER FOR OPERATION WITH SMALL TRACTORS. 2.3 METER TUNNEL WIDTH. LOW MAINTENANCE COSTS. TG 231 MECHANICAL FOR TRACTORS STARTING AT 35 HP With composting devices from Gujer Innotec, you can produce high-quality, aerobic soil nutrition in the shortest possible time. Gujer Innotec AG Horbenerstrasse 7 CH-8308 Mesikon TG 231 rene.gujer@gujerland.ch www.gujerinnotec.ch Page 1/8

In 1995, at Gujer Landmaschinen AG, which so far was only focused on repairs and trade, we built our first compost turner in Mesikon ZH, because in the market there was no model that met our needs. With Gujer Innotec we are always guided by technological progress, we attach great importance to quality, ecology and sustainability, in order to provide optimal concepts and customized machines. Renato Gujer “ Living and working with nature.” The TG 231 is a compost turner designed to produce smaller amounts of compost. It is ideal for field-edge composting, small composting plants and organic...

TG 231 – Its Advantages at a Glance Capacity up to 400 m³/h. Maneuverable machine; TG 231 has a length of only 3 meters. Low maintenance costs, easy maintenance Easy to maneuver, simple to use The massive construction of the tunnel-shaped dome and 6 mm steel achieves great stability and omits any weak points in the structure. In addition the powder coating protects against corrosion. All the wear plates are made of chromed steel Robust axel with balanced turning, which properly turns the compost material (from the inside to the outside) With the TG 231 a successful composting is achieved...

Capacity from For tractors with total width up to For tractors with at least 35 bis max. 80 PS Total width in transport position 1.85 m Weight (incl. wide base tires and counterweight) 1'950 kg Total width in operating position 4.05 m Internal Tunnel Height 1.35 m Total height (transport position) 3.55 m Ideal working speed 300 - 400 m/h Windrow Width x Height 2.5 x 1.2 m For tractors with creep speed: in first gear 300 - 400 m/h Simple altitude setting for the roller to work close to the ground yet cannot form any layer of putrefaction Left: through...

TG 231 Basic equipment, mechanical design Lighting System Tunnel with chrome steel plates, direct drive on transfer shaft Front trailer hitch: DIN coupling Large support wheel outside the tunnel Rear weight Mechanical feeding plates Lateral weight Braked axle, manual brake, parking brake Articulated shaft with spindle Joint shaft with shear bolts The solid arch construction made of 6 mm steel ensures a very high stability. The good turning shaft turns the material from the inside to the outside, so that the microorganisms can be replicated everywhere optimally. 12 mm shaft width with 3...

Lateral weight, hydraulically swiveling (via control valve tractor) Water sprinklers with nozzles Complete irrigation system hydraulically driven including water pump, spray boom with nozzles (via control valve tractor) Hydraulic skid steer for optimal ground clearance (via control valve tractor) Hydraulic tilting system of the tunnel (by tractor control valve). Through the inclination of the tunnel, the battery is not going to the field, e.g. in plants the battery is always easily removable. Fleece guides front and rear Down-hitch for deep pull Floating position (for tractors that don’t...

Hydraulic feeding plate, right side Picture TG301 Water filter Water sprayer with nozzles. To achieve an optimal microorganism climate within the mound, the addition of water is essential. PictureTG301 External water intake possibility for external water sources Complete irrigation system Picture TG301 Water pump Picture TG301 Hydraulic drawbar Hydraulic tilting system of the tunnel, so that the battery stays in the site where it belongs. The fabric cover is joined to a smaller width to allow gases to escape. The hard manual work involving the wet fabric is avoided. Bild zeigt TG301...

The purchaser is responsible for the country-specific operating permit. Please talk to our advisors. Your contact person Consulting and sales Renato Gujer Tel. +41 52 346 21 94 rene.gujer@gujerland.ch QIFW/Prospekt TG231/EN/11.16 Daniel Büchi Tel. +41 52 346 21 94 Werkstattchef@gujerland.ch Reserve the right to make technical changes. The images do not always correspond to the basic equipment. The purchaser is responsible for the country-specific operating permit. Gujer Innotec AG Horbenerstrasse 7 CH-8308 Page 8/8 Mesikon