The DP DME The DP DME offers possibilities to have a distance connected with each individual tree. When performing circular sample plot inventory, the distance to the plot centre from the centre of the tree is automatically calculated by the caliper software. The software can be programmed with functions to warn or refrain from registering trees beyond the preset plot border. The DP DME distance measurer is an instrument accessory for the Digitech Professional and the DP II. With the DP DME, measurements to determine if a tree is within the plot radius are performed with the help of ultrasound technique. The DP DME uses ultrasound to measure distances. The ultrasonic method is well proven and used in instruments such as the Vertex IV, the Vertex Laser and the DME. To measure with the DP DME, the T3 transponder is placed in the plot centre on a monopod staff. The DP DME is installed on the caliper comport and works with the host computer caliper and corresponding software. When measuring the tree diameter with the caliper, the DP DME can be activated to measure the distance from the tree centre to the transponder, placed on the monopod staff in the plot centre. The DP DME accessory will work with most Haglof Sweden computer caliper software applications after upgrading. The software can be customized to, for example, refrain from registering trees outside pre-set plot limits. The host computer supplies battery and display for the DP DME, and all instrument functions are software run. TECHNICAL SPECIFICATION DP DME Dimensions: 57x30x30mm, 2.28"x1.2"x1.2',. Accessories: Transponder T3, monopod plot staff, adapter. Position the T3 transponder in the plot centre on the monopod staff. The monopod, used for the DP DME, the Vertex IV, the Vertex Laser and the DME, is customized for use in tough field conditions. Measure the tree diameter with the caliper and activate the DP DME in your computer terminal. The software will determine the distance from the tree centre to the plot centre. Recommended software for the DP II with DP DME accessory: TIMS for standing trees art. no. 14-104-1052 Haglof SWEDEN

DP DME 13-600-1064 complete package/set incl. DP DME instrument, transponder T3, plot centre staff and adapter. 13-600-1065 DP DME Measuring unit only. A software upgrade can be included if you are working with a licensed Haglöf Sweden software and a Haglöf computer caliper (the DP II or the Digitech Professional). Check with us if your Haglöf Sweden software application is compatible with the DP DME. The DP DME instrument accessory uses ultrasonic signals to determine distance. The technique is well proven and appreciated in forest measurement work everywhere. Ultrasound signals have the capacity...