GROUND FORCE BRUSH BEAVER
12Pages

GROUND FORCE -BRUSH BEAVER- HAR-XHD7200 & HAR-XHD7800

Safety Symbols & Equipment Signs A This is the safety alert symbol. When you see this symbol on your equipment or in this manual, be alert to the potential for personal injury or injury to others. This symbol means to take notice. Following this symbol is useful and important information. Before using your new machine, you and all other operators should completely read through this manual. Failure to fully understand how to operate this machine and take safety precautions could lead to serious injury and death. These signs should remain on the machine always, DO NOT remove. If the signs...

Read through entire manual Always keep the manual in a safe and easily accessible place. Make sure to replace all missing or damaged decals. Do not make unauthorized modifications to machine which could decrease it’s stability and life or cause injury and possibly death. We also encourage you to only use authorized replacement parts from Harleman Mfg. w hich were made specifically for this machine. If there is any part of this guide you do not understand feel welcome to call our shop at any time. The number is A Never use alcohol or drugs while using this machine, doing so could lead to...

Attaching the machine Part A

The skid steer must be equipped with a compatible Standard Universal Quick Mount Hitch and Front Auxiliary Hydraulics to connect and operate the machine. A The skid steer must be equipped with an Operator Front Protective Door. Serious injury or death can result from a thrown object hitting an unprotected operator. 1. With the engine completely shut down and the parking brake set, rotate the skid steer latch handles upward to the unlatched position. The latch handles must be completely raised to fully retract the hitch lock pins. 2. Start the skid steer and tilt the hitch mounting plate...

1. This machine was designed to cut brush and trees up to a MAXIMUM 10" diameter. 2. Proper operating speed for equipment will vary depending upon the height, density, and type of the material to be cut. 3. Stay alert and watch for power lines and solid ground objects. 4. Choose a driving pattern that provides the maximum pass length and minimizes turning. 5.If mowing in reverse, operate the skid steer and mower at a reduced ground speed to ensure skid steer and mower control is maintained. A For safety reasons never operate this machine with the deck up. » Properly Cleaning and Storing...

FILL PLUG Since our equipment Fj ships ready to use there is no need to I fill the drive with The drive is prior to shipping.