HatchTech MicroClimer Setters and Hatchers
16Pages

MicroClimer Setters and Hatchers

MicroClimer Setters and Hatchers The key to achieving predictable and constantly HatchTech MicroClimer 150 Series superior chick quality is to ensure that the The MicroClimer 150 series is based on the egg- needs of the embryo are consistently and flat capacity of traditional incubation systems. The uniformly met during incubation. The embryo setter trays hold 150 eggs, and hatcher baskets are temperature, which is determined by the available that hold either 75 or 150 eggs. The trays environmental conditions around the egg, is and baskets of the 150-egg series are compatible especially...

HatchTech MicroClimer 88 Series The MicroClimer 88 series delivers outstanding space-saving efficiency. Thanks to the patented honeycomb design of the HatchTech 88 Setter Tray, this range can process the highest number of eggs per m2 in the industry. The HT 88 Setter Tray is smaller than traditional trays. This makes them easier to handle in manual and/or semi-automated hatcheries. In fully-automated hatcheries, the 88 tray delivers the highest processing speeds possible – up to 15% over traditional trays. Both of the MicroClimer series have other HatchTech MicroClimer Setters and Hatchers...

MicroClimer Technology for Superior and Uniform Chick Quality A high-quality, day-old chick that is optimally The incubator and hatcher create the incubation developed during incubation is the best environment required by the embryo using the production farm. Superior quality day-old chicks deliver better field performance in terms of better livability, and improved growth • Ventilation to supply O2, remove CO2 and rates and breast meat yield at lower feed conversion ratios. • Relative humidity. Producing perfect quality day-old chicks starts with Each of these parameters must be...

Laminar Airflow Uniform Environmental Conditions MicroClimer Setters and Hatchers are equipped Laminar airflow ensures that the optimal tempe- with HatchTech’s patented laminar airflow rature that the MicroClimer technology produces technology. The specially designed, perforated is homogenously delivered to every single egg. radiators create pressure differentials that Such precision control of the temperature of each distribute the air in a uniform flow of parallel air individual embryo translates into chick quality that layers. The air speed is uniform throughout the is not only...

Uniform Embryo Activator™ Gas-Sealed Incubation – Excellent Heat Transfer One of the first and most important steps in In the first stage of incubation, relatively high the incubation process is the pre-heating of humidity and a uniform temperature is required eggs from storage temperature to the optimal to transfer heat to the embryos. The quality incubation temperature. of this humidity is of crucial importance; the smaller the moisture droplet size, the better and With the Uniform Embryo Activator™, the com- more uniform the total heat transfer capacity plete pre-heating process...

• Polyurethane sandwich panel construction: up to 200% higher insulation value During the incubation process, the needs of than traditional Styrofoam panels. 100% the embryos change. In the first stage, the silicon sealed inside and outside. embryo’s metabolism – and therefore O2 • Closed environment: direct-drive fan motors prevent air leakage into the ventilation is necessary. Because of the gas- sealed environment, CO2 levels rise faster. This • The MicroClimer Door: closes is beneficial to early embryonic development downwards rather than to the side. Two since high CO2 levels stimulate...

Perfect and Uniform Humidification After the first phase of the incubation process, ventilation is necessary to provide the embryos • The ultrasonic technology in the U-Vaporator™ with sufficient O2 and to remove CO2 and moisture. During this time, it is necessary to maintain minimum relative humidity levels to switches on the moment the sensor indicates that the relative humidity is too low. • The ultrasonic elements produce small, rapid ensure uniformity of the environment. If the vibrations to create water droplets of 1 micron amount of moisture being lost by the eggs is – 30 to 50 times...

MicroClimer Controller Complete overview and total control The MicroClimer Controller gives you a complete The MicroClimer Controller provides power to and overview and total control of the incubator control over the ventilator, six temperature sensors environment. With a full-color, touch-screen (one per section), the CO2 and humidity sensors, interface and an easy-to-understand menu, it is a back-up sensor, the inlet and exhaust vents, the extremely user-friendly for hatchery personnel. individual trolleys (for egg turning) and the central M6-cooling and heating system. A red/green light...

Excellent Bio-Security for Healthy Chick Production In order to meet the standards of the global Fresh, Filtered Air Supply food industry, hatcheries must meet the highest possible bio-security standards. In traditional situations, return air from common HatchTech products are designed with setter or hatcher corridor is used for cooling, which special attention to bio-security, and is a source of cross-contamination in a hatchery. include several features that enhance high- The HatchTech MicroClimer uses radiators, not level bio-security programs. In addition to air, for cooling. What’s...

Ultimate Machine Sanitation™ In hatcheries, bacteria are becoming more and more resistant to standard disinfection chemicals. Ultimate Machine Sanitation™ uses heat disinfection in combination with a disinfectant to ensure all micro-organisms are killed during sanitation. How does it work? • The UMS™ Program is activated via the MicroClimer Controller. • The machine heats up to 120 °F to kill microorganism that are susceptive to temperature. • A disinfectant is used to kill the microorganisms that are resistant to heat. • The laminar airflow spreads the disinfectant Cross-contamination in...