

Catalog excerpts

[ bale processor with blower ] Processing bales for erosion control, feeding or bedding cattle or poultry are tasks that the Haybuster 2564 Balebuster takes on with vigor and determination. The 2564’s newly designed fan, spouts and discharge conveyor combined with the Haybuster patented live floor in the bale chamber, heavy duty flail tube with 40 flails and the two stage bale loader, makes it the best processor for a multitude of jobs. For 30 years we have built Haybuster Balebusters and have listened to our customers and have built the 2564 with both the commercial operator and the farmer/rancher in mind.
Open the catalog to page 1
FEATURES Inline Drive-Oil Bath Chain Case: The 2564 is equipped with an oil bath chain case that increases the rpm of the in line PTO by 20%. The double 80 chain also drives both the fan and the rotor. The drive line is protected by an overrunning clutch. Fan: The new fan design is welded on a HD 2 inch shaft for improved fan output. The fan housing and discharge chute is lined with AR 400 high abrasion steel for long life and improved performance. Both horizontal and vertical articulation is accomplished by hydraulics controlled from the tractor cab with a joystick control. Bale...
Open the catalog to page 2
EROSION CONTROL Straw Cannon The straw cannon will shoot straw mulch up to 100ft (30.5 m) dependent on wind and product. It works well for slopes and those hard to reach areas that are not easily accessible. Works best off the right hand side. The easy to operate, incab joy stick controls make distribution a breeze. 3-Foot Curved and Enclosed Curved Spout The three foot (.9 m) curved spout can be rotated 360 degrees with the in-cab joystick control. It distributes mulch out to 60 ft (18.3 m) where and however dense you need it. The 3-foot curved spout will spread straw almost the same...
Open the catalog to page 3
TRANSPORT DIMENSIONS Empty , Loader Fully Raised. Width 8 ft. 11 in. (2.71 m) Length 16 ft. 6 in. (5.02 m) Height 10 ft. 9 in. (3.26 m) WORKING DIMENSIONS With 1(one) Bale, Loader Fully Raised. Width 10 ft. 3 in. (3.12 m) Length 16 ft. 6 in. (5.03 m) Height 10 ft. 9 in. (3.26 m) w/curved spout With 2 (two) Bales, Loader in Bale Transport position Width 10 ft. 3 in. (3.12 m) Length 22 ft. 7 in. (6.88 m) Height 10 ft. 9 in. (3.26 m) CHASSIS FEATURES BALE LOADER Universal hitch, height adjustable w/safety chain Road or flotation Tapered roller Optional 12 in. Towing Arrangement Tires Bearing...
Open the catalog to page 4All Haybuster Agricultural Products catalogs and technical brochures
-
3106 ROCK-EZE 2023
5 Pages
-
2022 VERTICAL MIXERS
7 Pages
-
2023 TUB GRINDERS
7 Pages
-
ALL PURPOSE DRILLS
7 Pages
-
BALE PROCESSORS
9 Pages
-
2574 BALE PROCESSOR
2 Pages
-
Vertical Mixers
9 Pages
-
Tub Grinders
12 Pages
-
ALL PURPOSE GRAIN DRILL
8 Pages
-
EROSION CONTROL PRODUCTS
4 Pages
-
BALEBUSTERS
16 Pages
-
1150/1555 TUB GRINDER
4 Pages
-
BB2800
2 Pages
-
Balebuster 2665
2 Pages
-
2800 BALEBUSTER
2 Pages
-
2655 SHORTCUT
2 Pages
-
2650 BALEBUSTER
6 Pages
-
2100 BALEBUSTER
4 Pages
Archived catalogs
-
3106 ROCK-EZE
4 Pages