

Catalog excerpts

A tradition of innovation since 1966 • Rock windrowing and picking are combined into an ”easy”one-step operation. • Clears a 10 ft. (3.05 m) wide path. • Hardfaced rock windrower teeth. • 1 cu. yd (.765 cu m)capacity rock box • 80 in. (203.20 cm)rock box dump height. • Picks rocks with diameters from 2 in. (5.08 cm) to 15 in. (38.1 cm) • Field and road hitch • Heavy duty construction
Open the catalog to page 1
The ROCK-EZE requires just 80 horsepower. The 3106 ROCK-EZE clears your fields of rocks sized from 2 inches (5.08 cm) to 15 inches (38.1 cm) in diameter. The 3106 ROCK-EZE is halfway done picking this field.
Open the catalog to page 2
The ROCK-EZE requires just 80 horsepower. The windrower teeth comb through the top 1 inch of soil to dislodge the rocks. The windrower augers the rocks into the patented rock wheel. The ground driven rock wheel separates the excess dirt and stones smaller than 2 inches. (1) The rocks are carried up on spring loaded paddles and are dumped into the rock box. (2) The rock kicker assures that the rocks are distributed evenly within the rock box. The grate in the bottom of the rock box allows any soil that may have came in with rocks to return to your field. The rock box can dump 1 cubic yard of...
Open the catalog to page 3
TRANSPORT & FIELD DIMENSIONS Width Length Height Dump height Overhead clearance req. to dump CHASSIS FEATURES Tires Two Wheels Bearings 14’ 4” (4.37 m) Clevis type hitch Two position, swing into road or into field positions 11L x 16 Two 10 x 16 8 bolt, Drop Center Tapered roller ROCK PICKER MECHANISM Windrower Length Finger Length and type Outside Diameter Drive Lift 10’ (3.05 m) 3”(7.62 cm) and Hard Surfaced 11” (7.62 cm) Hydraulic via. #60 chain and drop case One 2 in. (5.08 cm ) x 8 in. (20.32 cm) double acting hydraulic cylinder that is shared with Rock Wheel lift. Minimum PTO...
Open the catalog to page 4All Haybuster Agricultural Products catalogs and technical brochures
-
3106 ROCK-EZE 2023
5 Pages
-
2022 VERTICAL MIXERS
7 Pages
-
2023 TUB GRINDERS
7 Pages
-
ALL PURPOSE DRILLS
7 Pages
-
BALE PROCESSORS
9 Pages
-
2574 BALE PROCESSOR
2 Pages
-
Vertical Mixers
9 Pages
-
Tub Grinders
12 Pages
-
ALL PURPOSE GRAIN DRILL
8 Pages
-
EROSION CONTROL PRODUCTS
4 Pages
-
BALEBUSTERS
16 Pages
-
1150/1555 TUB GRINDER
4 Pages
-
BB2800
2 Pages
-
Balebuster 2665
2 Pages
-
2800 BALEBUSTER
2 Pages
-
2655 SHORTCUT
2 Pages
-
2650 BALEBUSTER
6 Pages
-
2564 BALEBUSTER
4 Pages
-
2100 BALEBUSTER
4 Pages