Tub Grinders
1 / 12Pages

H-1000 TUB GRINDER The Haybuster PTO Tub Grinder line is made up of three sizes of grinders plus the option of an electric motor. The Haybuster Model H-1000 tub grinder is the most economical grinder available. Designed for the small rancher who still needs to get the hay ground. Fifty to 100 head cattle ranchers have learned to appreciate the ability and price of the H-1000. Of course, to make the H-1000 affordable for the smaller rancher, it’s limited on certain features, compared to other Haybuster models. The limited features include no tub tilt and a lighter-duty hammermill. This...

ybuster Tub Grinder do for you? H-1130 “BIG BITE” TUB GRINDER The H-1130 Big Bite tub grinder is Haybuster’s heavy-duty PTO grinder. It is designed with the features and the durability you need in a 11’ tub grinder. Some of these features include tub tilt, heavy hammermill with ½” plates and ½” hammers along with 1 ¼” rods, dual augers and a 26’ long stacking conveyor. The 315 hp drive system consists of an 8-groove belt/pulley system powered through a 77 series PTO driveline. The belt system tension is set at the factory and is designed to maintain its desired tension when stretching....

STANDARD FEATURES H-1000 TUB GRINDER The Model H-1000 is now equipped with an 18” wide by 20’ long hydraulic folding conveyor. The conveyor allows you to stack ground material up to 13’ 9” high. The hammermill is constructed of 3/16” thick x 15 ¾” diameter plates with 15/16” case hardened rods that hold 64-3/8” hammers. These hammers can be rotated and flipped for many hours of grinding. The 8-groove belt system delivers sufficient power from the PTO to the hammermill. The system has a fixed belt tension to accommodate, stretch and wear without having to monitor belt tension. This drive...

OPTIONAL FEATURES The dual 9” high-capacity augers mounted in the belly pan discharge the ground product to the stacking conveyor. The belly pan provides a clean area to catch and discharge small product such as ground corn and barley. The hydraulic folding stacking conveyor is powered by a positive mechanical drive system. The H-1000 tub 10’ 3” wide and 44 ½” deep and is constructed of a 10-gauge steel floor and a 14-gauge steel side wall. The H-1000 tub has the capacity to handle all types and sizes of bales. • PTO Shaft -1000 RPM Tractor Half, 1-3/4 in, 20 Spline Shaft Tractor Half,...

STANDARD FEATURES H-1030 “BIG BITE” TUB GRINDER The H-1030 is equipped with a 44” long heavy duty hammermill that has been positioned to the rear of the tub. With the mill in the back, the ground product can quickly be discharged and transferred to the stacking conveyor. The hammermill is constructed of 3/8” thick plates with 1 ¼” case-hardened rods that hold 64-3/8” hammers. These hammers can be rotated and flipped for many hours of grinding. The mill is mounted to the frame with two 3” pillow block bearings on a 3 ½” stress-proof shaft. The 8 multiple belt drive system has been designed...

The tub drive has continuous teeth around the tub and dual spring tensioners to keep the chain tight. Power is provided by a single hydraulic motor controlled by electronic governor. The H-1030’s tub opens a full 90 degreees for easy access to the hammermill and drive train for maintenance and service. The 21’ long x 24” wide hydraulicallyfolding conveyor is designed for the increased capacity of a 10’ tub grinder. The conveoyor folds over the top of the tub for easy transport. It is capable of stacking material up to 14’ 9” high at a the maximum angle. Large flotation implement tires...

STANDARDIFEATURES H-1130 “BIG BITE" TUB GRINDER The dual 12” belly augers are suspended by two heavy-duty bearings and are located at the base of the newly-designed screen area. The auger system allows for a sealed under-screen discharge area. The larger discharge area also provides for higher capacities and reduces the potential for plugging. The belt drive system for the hammermill has 8-5 VP belts to handle the increased rotor speed and increased horsepower capacity. The spring tension belt drive automatically adjusts belt tension as the belts stretch. The Big Bite 50” heavy-duty...

The large H-1130 Big Bite Tub is constructed of a 10-gauge steel floor and a 12-gauge steel side wall. The width of the tub is 11’ 3”, is 50” deep and can handle the largest round and square bales. The H-1130’s tub opens a full 90 degrees for easy access to the hammermill and drive train for service and maintenance. The hydraulic folding 24” wide by 26’ long high-capacity stacking conveyor is designed for the increased capacity of the H-1130. It can stack material 18’ 6” high. Large 16.5 x 16.1, 14-ply flotation implement tires provide for easy transportation and a solid base for the...

The H-1130 Electric tub grinder has all the features of the PTO driven heavy duty H-1130. It's powered by two electric motors, a 300 HP motor that drives the hammermill and a 10 HP motor that powers the hydraulics. It is available with a variety of electrical packages. A soft start panel provides for “soft” startup for the main drive 300 hp (23.8 kw) motor. The 10 hp (7.46 kw) motor that drives the hydraulics is a direct line start. Electric motors are available in 460 volt-60 Hz, 380 volt-50 Hz, 380 volt-60 Hz and 575 volt-60 Hz. All require three phase power. Please check with your power...

FACTORY SPECIFICATIONS MODEL H-1000 SERIES II PTO Tub Grinder WEIGHT: Total - 6,830 lbs (2,909 kg) TRANSPORT DIMENSIONS: Width - 10’ 3” (3.12 m) Length - 20’ (6.50 m) Height - 10’ 2” (3.1 m) CHASSIS FEATURES: Towing Arrangement - Clevis Type Hitch Bearings - Tapered Roller TUB FEATURES: Loading Height - 8’ (2.44 m) Tub Width at Flare - 10’ (3.05 m) Depth - 44 ½” (1.13 m) Tub Inside Dia. at Base - 8’ (2.44 m) Tub Wall Thickness - 12 gauge (1.9 mm) Tub Floor Thickness - 10 gauge (3.42 mm) Drive Mechanism - Full Sprocket around tub-Electro/Hydraulic Speed Control - Electronic Governor...