147C DRILL
147C DRILL
The document is an operating manual for the 147C Grain Drill by DuraTech Industries International Inc., designed for seeding in various tillage conditions. It includes detailed instructions on operation, safety, maintenance, and parts reference.
The 147C Grain Drill is versatile, allowing for seeding with fertilizer, seeding alone, or planting two different seeds. It features a two-compartment hopper and adjustable metering system.
Safety is emphasized with warnings about wearing protective gear and avoiding loose clothing. The manual uses safety-alert symbols to indicate different levels of hazards: DANGER for imminent hazards, WARNING for potential hazards, and CAUTION for minor hazards.
This section ensures the machine is properly prepared for use, including gauge wheel and legume box attachments.
Includes pre-operation inspection, setup, adjustments for pressure springs and press wheels, and calibration pointers. It also covers cleaning and storage procedures.
Details on grass seeding attachments and applications for legume boxes and agitators.
Guidelines for proper lubrication to maintain machine efficiency.
Includes warranty information and technical specifications.
Detailed diagrams and descriptions of the main frame, wheel and bearing assemblies, tank assemblies, and other components. It also includes optional kits and decal locations.
The manual is comprehensive, providing essential information for the safe and efficient operation of the 147C Grain Drill. It is crucial for operators to familiarize themselves with all sections to ensure proper use and maintenance.
Operators of the 147C Drill must be alert and avoid operating the machine when fatigued. Proper clothing is essential, including snug-fitting attire, gloves, sturdy boots, goggles, and ear protection. A hard hat is recommended to protect against debris. Safety shields must remain in place during operation, and all safety decals should be understood and followed.
Before operating the 147C Drill, read the operator's manuals for both the drill and the tractor. Ensure the tractor meets the minimum requirements and that all safety shields are in place. No riders are allowed on the equipment, and the machine should be shut off before servicing or inspecting.
Familiarize yourself with the safety decals on the machine, which provide critical information for safe operation. These include warnings about chemical exposure, sharp disc blades, and moving parts.
Shields are installed for protection and should be maintained. Operators should wear appropriate protective gear, and loose clothing should be avoided.
Before operating, ensure all instructions from the manuals and decals are followed. Only responsible individuals should operate the machine, and modifications should only be made if recommended by DuraTech Industries.
Exercise caution on slopes, ensure no one is near the machine during operation, and avoid loose clothing. Never work under a lifted drill without a safety stop bar.
Before maintenance, ensure the machine is not running. Use only authorized parts for replacements, and relieve hydraulic pressure before disconnecting lines. Use appropriate lifting devices when necessary.
Drive carefully, especially on rough roads, and ensure compliance with state laws regarding lights and safety signs. Do not exceed 20 mph when towing the drill.
Instructions for installing gauge wheels and legume box attachments are provided, including detailed steps and illustrations.
This manual provides operating, maintenance, and lubrication instructions for the 147C Grain Drill. It is important to understand these instructions thoroughly before operation.
When ordering parts, specify the model and serial number. Use only authorized parts for repairs.
The 147C Grain Drill is designed for various field conditions and offers flexible seeding options. It includes adjustable metering systems and optional hitches.
Operators should be well-trained and conduct visual inspections before use. Check hydraulic components, lug nuts, tire conditions, and ensure all safety features are in place.
The grain drill uses a standard 3” x 8” cylinder with a retracted length of 20-1/4”. Each grain drill requires its own cylinder. For stability, tractor wheels should be set as wide as possible. The grain drill is hitched to the tractor, and hydraulic hoses are connected to the tractor’s hydraulic system.
Adjustments allow for versatility across different terrains and soil conditions. The hydraulic cylinder stroke should be adjusted to ensure openers penetrate the soil by approximately two inches. The toolbar height should be about 20” when discs are new. Pressure spring tension varies with conditions, requiring more down pressure for no-till seeding and less for loose soil. The spring should not be adjusted to less than 10 inches to avoid damage.
Press wheels firm the soil around the seed and act as gauge wheels. Adjustments are made by relocating shim washers to change the wheel height, ensuring proper seed depth.
The 147C Drill uses a coulter-disk offset opener for effective residue cutting. The coulter blade is heavier and replaceable due to wear from the scissor action.
Control plates are mounted with specific assemblies. Feed wheel space adjustments are crucial for different seed sizes to prevent cracking and ensure even flow. Adjustments are made using a space gauge and bolt assemblies.
Cleanout slides are provided for grain and fertilizer tanks. Calibration pointers are preadjusted but can be recalibrated if necessary. Proper calibration ensures accurate seed and fertilizer distribution.
Feed rates are initially set using charts but may require adjustments based on material size and density. A method for checking feed rate involves measuring seed output over a specific distance and calculating the rate per acre.
Ensure the grain drill is properly set up before loading with seed or fertilizer. Regular checks for seed depth and feed rate are necessary during operation. After seeding, clean out remaining seed or fertilizer.
For storage, clean and flush tanks, apply protective coatings, and lubricate parts. Store in a dry place if possible, and check for worn parts to avoid delays when removing from storage.
1. Lubricate the machine following the lubrication instructions provided in the manual. Regular lubrication is crucial to ensure the longevity and proper functioning of the equipment.
2. Inspect all hydraulic hoses for signs of deterioration and replace them if necessary. Ensure all bolts, nuts, and hydraulic fittings are tightened.
3. Conduct a pre-starting inspection to ensure all components are in working order.
4. Clean grain tanks and legume boxes after using inoculated, treated, or coated seeds to prevent damage to moving parts, which is not covered by warranty. Add graphite to treated seeds to enhance performance.
The Haybuster 147C Grain Drill is versatile and can accurately meter most common seeds and fertilizers. It is suitable for conventional, minimum tillage, and zero-tillage situations. Special attachments are available for seeding various types of grass seeds, including small-seed legumes and chaffy native grasses. These attachments include legume boxes, single and double agitators, seed tubes, and depth bands. Specific seeds like alfalfa, clover, and ryegrass can be metered more accurately with these attachments.
The 147C Grain Drill is pre-serviced at the factory, but operators should familiarize themselves with grease fittings and service schedules. Use high-quality, multi-purpose grease and ensure all fittings are clean before application. Key lubrication points include swivel wheel pivots, torque tube bushings, universal joints, and feed wheel shafts. Regular lubrication is essential to prevent damage and ensure efficient operation.
Duratech Industries International provides a one-year warranty from the purchase date, covering defects in material and workmanship under normal use and maintenance. The warranty is void if the machine is misused, neglected, altered, or not maintained as required. Warranty claims must be made through the original dealer, and the warranty does not cover tires, bearings, or other trade accessories not manufactured by Duratech.
The 147C Drill has an overall width of 125 inches, a seeding width of 14 feet, and a height of 6 feet 2 inches. It weighs 5,650 lbs and features a seed box and fertilizer box with a capacity of 18 bushels each. The drill includes a rubber convoluted hose system, 7-inch row spacing, and double disc openers. Optional features include a swivel hitch, acre counter, legume box, native grass kit, and gauge wheels.
- Tank End Drive Assembly: Includes sprockets, chains, bearings, bolts, nuts, washers, and other components necessary for the drive assembly.
- Run Assembly: Details parts like bearings, bolts, nuts, washers, and specific components like convoluted hoses and blade assemblies.
- Seed & Fertilizer Setting Assembly: Lists components such as bearings, bolts, nuts, washers, and calibration tools.
- Scraper Assembly: Contains parts like scrapers, bolts, washers, and nuts.
- Feed Wheel Assemblies: Describes both double and triple feed wheel setups, including wheels, clips, and clamps.
- Coulter & Disk Assembly: Provides details on disks, bearings, cages, screws, and complete assemblies.
- Press Wheel Assembly: Includes press wheel components, bearings, spacers, and caps.
- Depth Band Installation: Instructions for installing depth bands.
- Drill Single Hitch & Swivel Hitch: Lists parts for hitch assemblies, including bolts, nuts, and chains.
- Hydraulics: Details hydraulic hoses, fittings, cylinders, and related components.
- Legume Box Assemblies (LH & RH): Includes parts for left-hand and right-hand legume box assemblies, such as bolts, nuts, washers, springs, and brackets.
- Decals: Provides information on various decals used for instructions, warnings, and branding on the machinery.
- Decal Locations: Pages 90-91 describe the locations for decals on the equipment.
- Parts Reference: Detailed lists of parts for the Native Grass Kit, including agitator shafts, seed cups, and tank end drive assembly. Each part is listed with its part number, quantity, and description.
- Installation Instructions: Step-by-step guide for installing the agitator kit in the rear compartment of the HAYBUSTER 147C drill box. This includes removing existing components, installing new parts, and adjusting settings for optimal performance.
- Agitator Kits: Instructions for installing feed shaft agitator kits, including the use of rubber paddles, paddle reinforcement plates, and finger agitators.
- Drive Chain Routings: Detailed routing instructions for drive chains, including top view diagrams.
- Single and Double Agitator Master Parts Lists: Comprehensive lists of parts required for single and double agitator setups, including sprockets, chains, bolts, nuts, washers, and other components.
- Documentation Feedback Form: A form for users to provide feedback on the manual's quality and usefulness, including suggestions for improvements.
- Agitator Shafts: Essential for ensuring smooth seed flow in the drill.
- Seed Cups: Critical for the distribution of seeds during planting.
- Tank End Drive Assembly: Important for the mechanical operation of the drill.
Catalog excerpts
Operating Instructions and Parts Reference Product Information DuraTech Industries International Inc. PO Box 1940, Jamestown, ND 58402-1940 Tel: (701) 252-4601• Fax: (701) 252-0502 0500157 • February 2020
Open the catalog to page 1
A Tradition of Innovation Since 19BB
Open the catalog to page 2
DuraTech Industries International Inc. (DuraTech Industries) has made every effort to assure that this manual completely and accurately describes the operation and maintenance of the 147C DRILL™ as of the date of publication. DuraTech Industries reserves the right to make updates to the machine from time to time. Even in the event of such updates, you should still find this manual to be appropriate for the safe operation and maintenance of your unit. This manual, as well as materials provided by component suppliers to DuraTech Industries are all considered to be part of the information package....
Open the catalog to page 3
A Tradition of Innovation Since 19BB
Open the catalog to page 4
ForewordAll personnel must read and understand before operating unit • Foreword and Section 1, important safety information. • Section 2, ’’Dealer Preparation,” to verify that the machine has been prepared for use. • Section 3, “Introduction,” which explain normal operation of the machine. • Section 4.1, “Operating Instructions” Pre-Operation Inspection Check List. The 147C Grain Drill is designed to seed No-Till, Minimum Till, or conventionally tilled fields. The two compartment hopper offers the flexibility of seeding with fertilizer, seeding alone, or planting two different seeds. As with...
Open the catalog to page 5
OPERATING INSTRUCTIONS
Open the catalog to page 6
OPERATING INSTRUCTIONS
Open the catalog to page 7
OPERATING INSTRUCTIONS
Open the catalog to page 8
PART 1: Operating Instructions OPERATING INSTRUCTIONS
Open the catalog to page 9
Introduction The 147C Grain Drill are designed to seed No-Till, Minimum Till, or conventionally tilled fields. The two compartment hopper offers the flexibility of seeding with fertilizer, seeding alone, or planting two different seeds. The metering system for each hopper is infinitely adjustable. Single and swivel hitches are available for the 147C Drill. Purpose The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most efficient operation of your 147C Grain Drill. There is also a trouble shooting section that may help in case of problems...
Open the catalog to page 10
Section 1: Safety The safety of the operator is of great importance to DuraTech Industries/Haybuster. We have provided decals, shielding and other safety features to aid you in using your machine safely. In addition, we ask you to be a careful operator who will properly use and service your Haybuster equipment. WARNING: FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS THAT FOLLOW WITHIN THIS MANUAL COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH. BEFORE ATTEMPTING TO OPERATE THIS MACHINE, CAREFULLY READ ALL INSTRUCTIONS CONTAINED WITHIN THIS MANUAL. ALSO READ THE INSTRUCTION MANUAL PROVIDED WITH YOUR...
Open the catalog to page 11
DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded. Signal word - White Lettering/Red Background Safety Alert Symbol - White Triangle/Red Exclamation Point WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices....
Open the catalog to page 12
1.2 Operator - personal equipment THE OPERATOR Physical Condition You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) which might impair vision, dexterity or judgment. Do not operate a 147C DRILL when you are fatigued. Be alert ‑ If you get tired while operating your 147C DRILL, take a break. Fatigue may result in loss of control. Working with any farm equipment can be strenuous. If you have any condition that might be aggravated by strenuous work, check with your doctor before operating Proper Clothing Clothing must be sturdy...
Open the catalog to page 13
1.3 Machine safety labels The safety decals located on your machine contain important information that will help you operate your equipment. Become familiar with the decals and their locations. WARNING: FOR YOUR PROTECTION AND PROTECTION OF OTHERS, PRACTICE THE FOLLOWING SAFETY RULES. 1. BEFORE OPERATING THIS MACHINE, READ THE OPERATOR’S MANUALS SUPPLIED WITH THIS MACHINE AND YOUR TRACTOR. 2. CHECK OPERATORS MANUALS TO BE SURE YOUR TRACTOR MEETS THE MINIMUM REQUIREMENTS FOR THIS MACHINE. 3. READ ALL DECALS PLACED ON THIS MACHINE FOR YOUR SAFETY AND CONVENIENCE. 4. NEVER ALLOW RIDERS ON THIS IMPLEMENT...
Open the catalog to page 14
WARNING: CHEMICALS MAY CAUSE EYE, SKIN AND BREATHING PROBLEMS. WEAR FACE MASK, GLOVES AND GOGGLES . READ AND FOLLOW SAFETY INSTRUCTIONS ON THE CHEMICAL SUPPLIERS LABEL. SERIOUS PERSONAL INJURY COULD RESULT FROM RIDING ON STEP WARNING: DISC BLADES ARE EXTREMELY SHARP! WEAR HEAVY GLOVES WHEN SERVICING. A WARNING Disc blades are extremely sharp! Wear heavy gloves when servicing. iLas cuchillas de disco estan extremadamente afiladas? Ai prestar servicio use guantes gruesos. WARNING: Moving parts can crush and cut. Keep hands clear. OPERATING INSTRUCTIONS
Open the catalog to page 15
Shields are installed for your protection. Keep them in place, and replace damaged shields. 1.5 Personal equipment Operators of this machine are encouraged to wear head, eye, and ear protection. Loose clothing is discouraged. 1.6 Safety review BEFORE OPERATING • Read and follow all instructions contained in: A. This 147C Drill Operator’s Manual. Tractor operator’s manual. Decals placed on the 147C Drill and Tractor. NOTE: Additional copies of the above mentioned materials can be obtained from your dealer. Be sure all safety shields and covers are securely in place when machine is running. Read...
Open the catalog to page 16
DURING OPERATION • Exercise extreme caution with operating the drill on steep slopes or grades. Be sure all spectators are clear of the area where the drill is in operation or raised and lowered. Be sure the tractor operator is the only person riding the tractor. Allow no one to ride the drill at any time. Remember, loose clothing, necklaces and similar items are more easily caught in moving parts. Avoid the use of these items if possible and keep long hair confined. Never work under the drill when the drill is lifted up unless the safety stop bar is in position. Watch out for and avoid any object...
Open the catalog to page 17All HayBuster catalogs and technical brochures
77C/107C DRILLS164 Pages
3106 ROCK-EZE84 Pages
CMF-590 TM VERTICAL MIXER110 Pages
CMF-710 TM VERTICAL MIXER142 Pages
CMF-830 TM VERTICAL MIXER178 Pages
CMF-1200 Vertical Mixer9 Pages
H-1000 TM PTO Driven Tub Grinder146 Pages
H-1030 TM PTO Driven Tub Grinder237 Pages
H-1135 TM PTO Driven Tub Grinder243 Pages
1150 /1155 Tub Grinder TM106 Pages
2800 TM BALEBUSTER136 Pages
Balebuster 2660156 Pages
2574 TM BALEBUSTER146 Pages
Balebuster 21009 Pages