Operating Instructions and Parts Reference PTO Driven Tub Grinder Includes: Stationary Electric Supplement Product Information DuraTech Industries International Inc. PO Box 1940, Jamestown, ND 58402-1940 Tel: (701) 252-4601• Fax: (701) 252-0502 0500167 • August 2023

A Tradition of Innovation Since 1966

Foreword All personnel must read and understand the following sections before operating the H-1135 Tub Grinder. • Foreword and Section 1, important safety information. • Section 2, “Machine operation,” which explains normal operation of the machine. • Section 2.1, “Pre-Operation Inspection”. The H-1135 Tilt Tub Grinder is designed to grind material into more palatable or manageable rations for your operation. It has multiple uses: 1. Grind most types of hay • Square bales 2. Grind most types of grain • Shell corn • High moisture corn OPERATING INSTRUCTIONS

• Most small grains 3. Grind most types of crop residue 4. Grind various sizes • Screens are available from 1/8” to 8” • Combine screen sizes to get desired cut As with all machinery, care needs to be taken in order to insure the safety of the operator and those in the surrounding area. WARNING: The OPERATOR IS RESPONSIBLE for the safety of the operator and those in the surrounding area. Operators and those observing the operation of the H-1135 Tub Grinder are required to wear head, eye, and ear protection, No loose clothing is allowed. OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

A Tradition of Innovation Since 1966 OPERATING INSTRUCTIONS

Part 1: Operating Instructions OPERATING INSTRUCTIONS

Introduction The H-1135 Tub Grinder is designed to grind material into more palatable or manageable rations for your operation. It has multiple uses: 1. Grind most types of hay • Square bales 2. Grind most types of grain • Shell corn • High moisture corn • Most small grains 3. Grind most types of crop residue 4. Grind various sizes • Screens are available from 1/8” to 8” • Combine screen sizes to get desired cut To avoid possible damage to the machine and risk of injury to the operator, consult with a DuraTech Industries International, Inc. (DuraTech Industries) representative before attempting...

How to use this manualManual organization This manual is organized into the following parts: • Part 1: Operating Instructions • Section 1: Safety decals, safety instructions and information • Section 2: Describes the purposes of each part, and safe operating procedures. • Section 3: Describes how to maintain the H-1135 Tub Grinder. • Section 4: Describes how to trouble shoot problems with the H-1135 Tub Grinder. • Part 2: Part’s reference contains diagrams of each assembly, with the part number of each part. A key on the same or facing page contains a description of the part and the quantity...

Section 1: Safety The safety of the operator is of great importance to DuraTech Industries/Haybuster. We have provided decals, shield and other safety features to aid you in using your machine safely. In addition, we ask you to be a careful operator who will properly use and service your Haybuster equipment. /N, WARNING: FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS THAT FOLLOW |\\ WITHIN THIS MANUAL COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH. | \\ BEFORE ATTEMPTING TO OPERATE THIS MACHINE, CAREFULLY READ ALL / / > \\ INSTRUCTIONS CONTAINED WITHIN THIS MANUAL. ALSO READ THE INSTRUCTION -) MANUAL...

DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded. Signal word - White Lettering/Red Background Safety Alert Symbol - White Triangle/Red Exclamation Point WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices....

1.2 Operator - personal equipment THE OPERATOR Physical Condition You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) which might impair vision, dexterity or judgment. Do not operate a H-1135 when you are fatigued. Be alert ‑ If you get tired while operating your H-1135, take a break. Fatigue may result in loss of control. Working with any farm equipment can be strenuous. If you have any condition that might be aggravated by strenuous work, check with your doctor before operating Proper Clothing Clothing must be sturdy and snug‑fitting,...

1.3 Machine safety labelsThe safety decals located on your machine contain important information that will help you operate your equipment. Become familiar with the decals and their locations. DANGER: ROTATING PARTS WITHIN CAN KILL OR DISMEMBER. WAIT FOR ALL MOVEMENT TO STOP BEFORE SERVICING, UNLOADING, OR INSPECTING MACHINE. [ROTATING PARTS WITHIN CAN KILL OR DISMEMBER WAIT FOR ALL MOVEMENT TO STOP BEFORE SERVICING, UNCLOGGING OR INSPECTING MACHINE DANGER: ROTATING DRIVELINE, CONTACT CAN CAUSE DEATH, KEEP AWAY! • ALL DRIVELINE GUARDS, TRACTOR AND EQUIPMENT SHIELDS IN PLACE • DRIVELINES SECURELY...

WARNING: FOR YOUR PROTECTION AND //1\ PROTECTION OF OTHERS, PRACTICE THE // ■! FOLLOWING SAFETY RULES. 1. BEFORE OPERATING THIS MACHINE, READ THE OPERATOR'S MANUALS SUPPLIED WITH THIS MACHINE AND YOUR TRACTOR. 2. CHECK OPERATORS MANUALS TO BE SURE YOUR TRACTOR MEETS THE MINIMUM REQUIREMENTS FOR THIS MACHINE. 3. READ ALL DECALS PLACED ON THIS MACHINE FOR YOUR SAFETY AND CONVENIENCE. 4. NEVER ALLOW RIDERS ON THIS IMPLEMENT OR THE TRACTOR. 5. KEEP OTHERS AWAY FROM THIS MACHINE WHILE IN OPERATION. 6. KEEP ALL SHIELDS IN PLACE WHILE MACHINE IS OPERATING. 7. KEEP HANDS, FEET, LOOSE CLOTHING, ETC.,...