GRASS-TILLER
2Pages

2,50 m w/Quick-Push and Star roller.        1,80 m w/Quick-Push and Star roller. Ø400 mm disc in front of the tine. 2,50 m w/hydr. release system and synchronous Star roller. Good clearance with a frame height of 820 mm. Strong frame construction, 180x180x8 mm sectional tubes. Hydr. depth control from 0 – 500 mm.(Requires double-acting oil outlet) 3 stone protection types: Shear bolt, Quick-Push or Hydraulic automatic. Infinitely variable tine spacing, depending on the models & number of tines. Ø400 mm scalloped disc-coulters, stone protected via rubber suspension, depth adjustable via 2 spindles. Three-point linkage with cat. 3 pins & cat. 2 distance. PRICES IMPORTANT: If a change of the stated ”standard-mounted” row spacing is required – please inform when placing an order. Max. total tine spacing from the two outer tines is always 50 cm lower than the working width. Working width Type of stone protection Shear bolt Quick-Push shear bolt Hydr. auto. release sys. Shear bolt Quick-Push shear bolt Hydr. auto release sys. Shear bolt Quick-Push shear bolt Hydr. auto. release sys. Shear bolt Quick-Push shear bolt Hydr. auto. release sys. Star roller ø450/500 mm (synchronously – 400 mm No. of in the width per tine) tines Item no. 2 3 2 3 2 3 3 All types require 1 double-acting outlet. Star roller ø450/500 mm (full width)

STANDARD EQUIPMENT FOR GRASS-TILLER   Hydr. depth control incl. depth scale Standard with Ø400 mm scalloped disc in front of the tine – stone protected by rubber suspension; depth adjustable via 2 spindles. For Quick-push stone protection: 8 steps per bolt. For shear bolt stone protection: 1 extra shear bolt per tine included. Points with 200 mm wing share mounted on 25 mm wide tine. Tine staggering: 200 mm EXTRA EQUIPMENT Designation Points with 120 mm wing shares Price reduction per tine Points with 350 mm wing shares Add. price per tine Points 200 mm with hard metal plate Add. price...