Classic
8Pages

{{requestButtons}}

Catalog excerpts

Classic - 1

Classictrailed sprayer Working widths: 18 - 36 m

Open the catalog to page 1
Classic - 2

All valves are located centrally on the induction centre and ensure an easy handling of the trailed sprayer Classic. The robust self-priming piston diaphragm pump with the help of the injector creates a suction capacity of up to 1000 I / min. This allows filling in less than 5 minutes with a tank of 4400 liters. Thanks to its vacuum suction principle, the injector allows solids to be sucked in from the induction center into the tank; it draws in at 3101/ min from the rinsing center. The induction center holds 60 liters and is supplied with fresh water during filling. For rinsing and...

Open the catalog to page 2
Classic - 3

The new SC-Tank The new DAMMANN-SC tank is easy to clean with its built-in cleaning nozzles thanks to its special gel-coated surface and its tried-and-tested box design with a low outlet and 10% safety reserve. The well-placed baffles provide additional safety during braking and prevent unwanted weight shifts of the contents. The integrated fresh water tank has a volume that is sufficient for complete cleaning of the device and is installed in the center. Nozzle carrier and nozzle pipe The Classic trailed sprayer is equipped with an electropneumatic single nozzle carrier and a 1/2" VA...

Open the catalog to page 3
Classic - 4

DCD Distance Control Dammann The new fully automatic boom control from Dammann. DCD is the first boom control that unifies two control elements into one to benefit from the advantages of both elements. DCD uses the hydraulics and pneumatics to control the boom. The hydraulics sets the boom into the desired position and the pneumatics is used for the repositioning of the boom into the right position. The boom position is controlled by four ultrasound sensors and an angle potentiometer. An additional gyroscope records the gravitational forces that occur when passing curves. The handling of...

Open the catalog to page 4
Classic - 5

HD-NIGHT LUX (option) LED spraying pattern lighting „HD-Night LUX" with obstacle finder. Every switched on spraying pattern is lighted by an LED light. This way the driver has the visual control of the function of the nozzles. The obstacle finder lights the obstacles, the remaining field is lighted slightly. This way the driver has a clear view of the obstacles and the field is not overexposed. Nozzle carrier (options) Three additional optional nozzle carriers are available: » Three-fold nozzle carrier » Tandem nozzle carrier Incl. Multi-function circuit » Quattro nozzle carrier...

Open the catalog to page 5
Classic - 6

The rotating stirring and cleaning - RRW The RRW is the intelligent solution that is mounted in the tank. The stirring and cleaning system is mounted centrally on the lower part of the tank. This shaft is equipped with special nozzles that are used for the stirring and cleaning of the tank. While stirring the shaft is swiveling from the left to the right. The swiveling height is adjusted to the filling level of the tank, which avoids foam formation. The injector action of the injector nozzles enhances the turbulence of the full jet in the barrel. At relatively low volume flow, there is an...

Open the catalog to page 6
Classic - 7

Steering drawbar (option) The DAMMANN steering drawbar ensures the Classic trailed machine follows the exact path of the tractor rear axle. LED working lights (option) The machine can be equipped with two or four LED working lights. When selecting two working lights the lights are mounted on the middle frame. When selecting four working lights one light is mounted on every second boom. External cleaning (option) DAMMANN offers three possible options for external cleaning: » Washing brush with hose reel » Vario spray pipe with hose reel 15 bar. » High pressure cleaner with...

Open the catalog to page 7
Classic - 8

Automated and level-controlled continuous internal cleaning CID The automated and level controlled continuous internal cleaning CID from DAMMANN is a unique innovation in the field of crop protection technology. Internal cleaning is initiated automatically when the level sensor signals that the tank is empty. Likewise, the internal cleaning is interrupted if the level in the tank is too high. In addition, it ensures that there is enough fresh water for a final interior cleaning or for external cleaning. DAMMANN‘s CID shows outstanding cleaning results, which were certified by the...

Open the catalog to page 8

All Herbert Dammann GmbH Pflanzenschutztechnik catalogs and technical brochures

  1. Profi-Class

    12 Pages

  2. Land Cruiser

    4 Pages