Stump cutters for excavators Stump cutters for use with other machines The best stump cutter in every class. The perfect solution for excavators between 3 and 30 tonnes. The Herder-Fermex stump cutters are also in a class of their own as far as service life and ease of use are concerned. Herder-Fermex stump cutters have been combined trouble-free for years with all kinds of vehicles. We have solutions to fit any vehicle with its own hydraulics. That is our strength. Always the best stump cutter Custom-built We deliver stump cutters for every machine. The stump cutters can be engineered as desired for vehicles with their own hydraulics. Whether it is a radio-controlled mower, a loader or another kind of vehicle, HerderFermex can offer a suitable solution for every vehicle. • Middle stump cutter in this series • Suitable for excavators between 7 and 20 tonnes • Cutting wheel with a diameter of 55 cm (64 cm with teeth) • Choice of 2 hydraulic motors. Oil flow between 60 and 80 l/min and between 90 and 120 l/min. • Maximum freedom of movement thanks to hydraulic drive • Middle stump cutter in this series • Suitable for excavators between 10 and 20 tonnes • Cutting wheel with a diameter of 63 cm (72 cm with teeth) • Choice of 2 hydraulic motors. Oil flow between 80 and 110 l/min and between 110 and 150 l/min. • Maximum freedom of movement thanks to hydraulic drive • Largest stump cutter in this series • Suitable for all hydraulic excavators with oil flow between 80 and 160 l/min. • Suitable for excavators between 10 and 30 tonnes • Cutting wheel with a diameter of 80 cm (89 cm with teeth) • Comes as standard with mechanically adjustable hydraulic motor • Maximum freedom of movement thanks to hydraulic drive The example shown here is for mounting on a radio-controlled mower. The unique teeth system of Herder-Fermex The system consists of just 2 different tooth holders. Separate teeth are used which can be rotated 3 times before they need to be replaced. In brief, the certainty of minimum costs and maximum return. • Unique system • The system consists of just 2 different tooth holders (instead of 4 or 6 different ones) • Separate teeth which can be rotated 3 times before they need to be replaced. This reduces consumable costs to a minimum. • Less power loss • Easy to attach • Reuse of tooth holders • Up to 30% higher cutting output • Up to 50% lower costs You can achieve the most with Herder www.herder.nl Herder B.V. | P.O. Box 8010, 4330 EA, Middelburg | The Netherlands | T. +31(0)118 679500 | F. +31(0)118 638730 | E. [email protected] • Smallest stump cutter in this series • Suitable for excavators between 3 and 8 tonnes • Cutting wheel with a diameter of 41 cm (50 cm with teeth) • Choice of 2 hydraulic motors. Oil flow between 30 and 40 l/min and between 40 and 50 l/min. • Maximum freedom of movement thanks to hydraulic drive • Mechani

Stump cutters with own diesel motor Herder-Fermex offers you a choice of stump cutters with diesel motors of 32, 75 and 110 HP. Their compact design enables the machines to be used even at the most inaccessible of places. Stump cutters for tractors Whatever your make of tractor, you are better off on all fronts with the Herder-Fermex stump cutters for tractor attachment. The stump cutters are suitable for tractors of 65 to 260 hp. • Diesel motor 32 hp • 79 cm wide to reach the most inaccessible places • Hydraulic drive for maximum freedom of movement of the cutting wheel • Cutting depth approx....