Depth Gauge Depth Gauge Vehicle equipment orientation Calibration of depth measurement Install the rear and front drivers in the same position. On the Subsoiler configuration screen, press Calibration. Set the Depth reference in centimeters. Incorrect position Position subsoiler at ground level and press Calibration reference. Wait for the calibration to complete. 90 o Install the driver 90º from de ground Position subsoiler at reference depht and press Operation calibration. Wait for the calibration to complete. Press Save. . Perform the calibration before each workshift on a level ground so that the tractor and implement are at the same level of soil. To redo the calibration, go back to the implement configuration screen. Do not install tilted.