Catalog excerpts
ATLANTIS WATER METER ©• hirlrnconta tecnologia hidraulica
Open the catalog to page 1tecnologfa hldriullca WATER METER ATLANTIS Hydrodynamic design High protection The Hidroconta Atlantis water meter is based on the principle of single speed and sinlge jet. The water enters into the measuring chamber forming a single jet that pushes the vanes of the turbine, producing its movement. The turn of the turbine is transmitted by magnetic transmission, through a shaft and gears, to a head that accumulates in its totalizer the volume of water that has circulated through the meter. Atlantis has a security system that prevents the rotation of the fixing ring of the water meter and...
Open the catalog to page 2tecnologfa hldriullca WATER METER ATLANTIS Homologation MID The Atlantis water meter from Hidroconta has the metrological requirements based on the Directive 2014/32 / EU, so they are normally used for the totalization and control of domestic water consumption. In Hidroconta we make strict tests in the counters that assure its quality and its precision. Water engineering When the water go through the meter, the propeller begins to rotate. The axis propeller transforms the rotating motion into a rotating magnetic field. This magnetic field rotates the watch gears that end in an indicator...
Open the catalog to page 3WATER METER ATLANTIS Dial Lining figures dial Rotary starwheel for leak detection. MID approval for potable water. Technical specifications - For cold water up to 30 C˚. - Copper alloy body. - Direct reading in 7-digit roller counter indicating m3. - Completely dry and unsumerged dial. - Magnetic transmission protected against external magnetic fields. - The dial can be turned manually: For reading in any position. - MID approval for potable water. Directive 2014/32 / EU. - Straight sections are not necessary at the meter input or output U0-D0. Al rights reserved. © Copyright. 2016 HIDROCONTA....
Open the catalog to page 4tecnologfa hldriullca WATER METER ATLANTIS Fixing ring Separated plate Copper alloy Fitting tube Copper alloy Copper alloy Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS
Open the catalog to page 5Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A.
Open the catalog to page 6WATER METER ATLANTIS Technical specifications Pressure loss curve Flow error curve Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS
Open the catalog to page 7tecnologfa hldriullca WATER METER ATLANTIS Straight sections are not necessary at the Atlantis input or output UO-DO. installation instructions - The meters must always be full of water when operating, minimum presure 0,3 bar, and installed below the slope of the rest of the pipeline. This stops air pockets from forming inside. - If there is air in the pipeline, suckers must be fitted to avoid incorrect readings. If the water in the pipeline contains large suspended particles, an initial screening filter should be installed. - Fit a valve upstream from the meter to facilitate maintenance or...
Open the catalog to page 8WATER METER ATLANTIS 1- Which is the difference between dry dial, wet dial and semi-dry water meter dial? On water meters with dry dial the reading mechanism (clock) is tightly separated from the wet chamber of the meter. On Wet dial water meter the watch is totally immersed in the fluid. For water meters with semi-dry dial, the reading mechanism is totally immersed in the fluid but the dial is partially serrated and protected by a sealed capsule. 2- What are the ranges of measurement and precision? The measuring range of the meters is determined by the Directive MID 2014/32 / UE establishing...
Open the catalog to page 9©• hirlrncorita hydraulic technology ATLANTISIwATER METER WHEN WATER COUNTS cuando el agua es lo que cuenta Hidroconta disclaims responsibility for errors in the information contained in this document, which may be modified without notice. Al rights reserved. © Copyright. 2016 HIDROCONTA SA
Open the catalog to page 10All HIDROCONTA S.A. catalogs and technical brochures
-
triton
11 Pages
-
fenix
11 Pages
-
MFSM-L
10 Pages
-
Atlantis.v6
10 Pages
-
HIDROMAG
10 Pages
-
Dual plate retention valves
4 Pages
-
Butterfly valves
5 Pages
-
Dosing pumps
6 Pages
-
Hidromatic
15 Pages
-
Hidrojet
10 Pages