MFSM-L WATER METER www.hidroconta.com

MFSM-L WATER METER Hydrodynamic design Multi-jet technology ensures uniform distribution of load on the turbine located thanks to the water inlet diffuser. The movement activates the magnetic transmission that will give the final reading of the volume. High protection Hidroconta MFSM-L watermeters are designed to avoid external manipulation by magnetic fields. They have a special shield that covers the dial and prevents any possible fraud. Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS

MFSM-L WATER METER Potable water MID Homologation Thanks to the homologation acquired, the low maintenance needs and the reduced pressure losses this product is suitable for totalizing water for domestic use. Pre-equiped The MFSM-L dial has a pre-installation that allows to place a pulse emitter, without having to stop the counter, this will give information of the reading. Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS

MFSM-L WATER METER Dial 5 lining figures dial. MID Approval for use domestic water. Rotary starwheel for leak detection. Technical specifications - Copper alloy body coated with Epoxy paint. - Turbine and dial in thermoplastic material. - Vacuum dial to prevent condensation of water. - Magnetic transmission protected against external magnetic fields. - Pre-installation of pulser for remote reading. Quick connection without stopping or dismantling the meter. - High mechanical and wear resistance . - MID approval for potable water. MID 2014/32 / EU Directive. - Straight sections are not necessary...

MFSM-L WATER METER Flange cover dial Flat seal Magnetic Gear Magnetic ring Magnetic ring Flat seal Filter distributor Filter joint Copper alloy Screw adjustment Copper alloy Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS

MFSM-L WATER METER Weight with fittings Weight without fittings Threaded fittings Packing Calibre GROSS WEIGTH Working conditions Room temperature Maximum pressure Maximum permissible error Range Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUN

MFSM-L WATER METER Technical specifications Mininimum Reading Maximum Reading Pressure loss curve 32mm Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS

MFSM-L WATER METER Flow error curve +5 Pulse emisor Type Reed sensor Pulse value Min. amperage to close contact Max. amperage to close contact Closed contact impedance Open contact resistance Close contact lapsed time Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A. WHEN WATER COUNTS

MFSM-L WATER METER Straight sections are not necessary at the MFSM-L input or output U0-D0. Installation instructions - Place the meter so that the arrow matches the direction of the water flow. - Fit a valve upstream from the meter to facilitate maintenance or repair. - The meters must always be full of water when operating, minimum presure 0,3 bar, and installed below the slope of the rest of the pipeline. This stops air pockets from forming inside. - A new pipeline should be drained before fitting a meter to eliminate particles. - If there is air in the pipeline, suckers must be fitted to avoid...

MFSM-L WATER METER WHEN WATER COUNTS CUANDO EL AGUA ES LO QUE CUENTA Hidroconta disclaims responsibility for errors in the information contained in this document, which may be modified without notice. Al rights reserved. © Copyright. 2016 HIDROCONTA. S.A