HI18000ZMK TWO-AXLE-DUMPER Profiline (HI18001ZMK) This vehicle is designed for hardest strains. Thanks the hard front and rear board panel the bridge is very stabile. Gross vehicle weight rating 18000 kg Bridge as hutch, side or rear tilting Left side board panel with double action cylinders (Side board panel is operated over the whole width and height hydraulic.) Rear board panel ca. 500 mm, pendulum Board panels extra stabile, 3 mm sheet thickness with rectangular tube frame 120x60 mm Inside bridge width 2420 mm Inside bridge length 5000 mm Board panel height 1600 mm 10-hole-axes (increased design) 2000 mm track gauge, heavy duty axes with brake Axes for105 km/h (without ABS till 60 km/h) ALB-controller (automatic load-dependent brake) Parabolic spring 2-ply, 100 mm wide Central locking sidewise, operated automatically with side board panel Hydraulic locking and unlocking Block for dosed opening and save locking Ball-tilt-bearing Ø110 mm Grain outlet rear H300xW400, grain valve with arm Bottom 4 mm Paintwork in 2-componenten PUR laminated hard paint Tire 385/65R22.5 (available also as wide-base-tire) Technical control board expertise for 40 km/h Different equipment by request Technical changes reserved. Extra charges Roller soft top Tire 550/60–22.5 16 PR Chaff top (sheet or grid) (not tight for grain) Additional side opening with central locking ca. 500 mm high with middle stake (3-side-dumper) Automatic trailer coupling Trailer coupling 8 t Air- and hydraulic connection for 2. trailer 2. hydraulic gear Air suspension Freight charge by request ca. Hilken Fahrzeugbau Gmbh Große Str. 16 27412 Vorwerk-Buchholz