- Catalogs
- Hillco Technologies, Inc.
- Model JS7020 Hillco Leveling System For Serial Numbers JS7020-23001 thru JS7020-23999
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-23001 thru JS7020-23999
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-23001 thru JS7020-23999
This document is a parts manual for the Model JS7020 Hillco Leveling System, applicable to specific serial numbers. It is intended for use with various John Deere combine models. The manual includes exploded views for part identification, with reference numbers linked to part lists detailing part numbers, descriptions, and quantities.
The serial number is located on the machine and follows the format JS7020-XXXXX.
Common abbreviations include SN (Serial Number), ASM (Assembly), and NS (Not Shown).
Orders must include model, serial number, part number, description, quantity, and shipping and billing addresses.
- Tilt Sensor: Includes sensor bracket, bolts, O-ring, sensor shaft, and linkage.
- Feeder Drum Arms and Chain Extensions: Details drum configurations and associated parts.
- Transition Throat: Describes non-hydraulic and hydraulic configurations.
- Transition Header Adapter: Covers non-hydraulic and hydraulic setups.
- Overcarriage: Includes washers, clamping collars, pivot bushings, and cylinder pins.
- Undercarriage: Details narrow and wide configurations.
- Miscellaneous Carriage Parts: Lists clamps, hose supports, and linkage assemblies.
- Carriage Position Sensor: Includes clinometer orientation and sensor components.
Includes leveling manifold, header trim manifold, gear pump, and hoses.
Details the controller, wiring harness, and monitor.
Hillco Technologies, Inc. is located in Nezperce, Idaho. Contact via phone, fax, or email.
- Tolerances: General and angular tolerances specified.
- Material and Treatment: Welding must adhere to Hillco standards.
- Assemble the position sensor as shown.
- Secure the sensor to the mount using M8 bolts.
- Secure the clinometer using #6 screws.
- Install and secure the harness on sensors.
- Lists parts for assemblies including sensors and hydraulic components.
- Includes cylinders, valves, and hoses with specific dimensions.
- Includes wiring harnesses and controllers for system operation.
- Details on retractable ladders and service steps.
The document is proprietary and confidential.
Includes electrical leveling schematics and details on key components.
Provides safety warnings and decal placements for operator safety.
Catalog excerpts
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Sidehill Leveling System Parts Manual
Open the catalog to page 1
JS7020 Sidehill Leveling System For S680, 690, s780 & s790 S-Series Combines Table of Contents General Information Serial Number Location Text and Illustrations Abbreviations Right and left Identification Part Orders Transition4 Tilt Sensor 5 Feeder Drum Arms and Chain Extensions 6 Transition Throat 8 Transition Throat - Hydraulic Fore/Aft 10 Transition Header Adapter 12 Transition Header Adapter - Hydraulic Fore/Aft 14 Carriage16 Overcarriage17 Undercarriage19 Carriage Misc. Parts 21 Carriage Position Sensor 23 Drop Axle Hydraulic Components Leveling Manifold Header Trim Manifold Gear Pump Hydraulic...
Open the catalog to page 2
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 GENERAL INFORMATION SERIAL NUMBER LOCATION TEXT AND ILLUSTRATIONS The arrangement of this parts catalog is for easy identification of parts. All parts are illustrated in exploded views in proper relation to each other. Some diagrams refer to other pages for further information. Reference numbers used in the illustrations refer to line numbers in the part lists. The part lists appear to the right or below all diagrams and correspond with those diagrams. Included in the part lists, along with the reference numbers...
Open the catalog to page 3
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Position Sensor Page 5 Transition Throat Page 8 & 10 Feeder Drum Arms Page 6 Header Adapter Page 12 & 14
Open the catalog to page 4
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 TRANSITION TILT SENSOR TRANSITION POSITION SENSOR Qty Description 1 BRACKET, SENSOR 2 BOLT,HX,CL8.8 M8X20 1 O-RING, 11/16 ID 1 SENSOR SHAFT, 1 SENSOR, ROTATION, 2 BOLT, HX,CL8.8 1 BUSHING, 2 ROD END, BALL JOINT, 1 PIN,ROLL M6X36 1 SENSOR LINKAGE 2 BOLT,HX,FL,CL10.9 M6X25 2 NUT,HX,NYL,CL8 M6 2 NUT,HX,JAM,GR5 1/4-28 1 SENSOR ROD 1 ARM, TILT SENSOR
Open the catalog to page 5
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Feeder Drum Arms and Chain Extensions 10” Drum, 3 Strand 8” Drum, Full Travel, Hydraulic Fore/Aft 8” Drum, Limited Travel 8” Drum, Full Travel 8” Drum, Limited Travel, Hydraulic Fore/Aft 16 Updated Apri
Open the catalog to page 6
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 TRANSITION THROAT - NON HYDRAULIC FORE/AFT
Open the catalog to page 8
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Transition Throat RIGHT WEARPAD LINK, OFFSET COUPLER CA557 LINK, FEMALE, CA557 CHAIN LINK WITH K6 SIDEBAR COUPLER, CA557 CHAIN LINK BOLT,HX,CL10.9 M10 NUT,HX,STV,CL10 M10 SLAT, CAST ( See previous pages for more slat options) THROAT, SIDEHILL FEEDR DRUM ARM (10" - See previous pages for more drum arm options) BUSHING,MACH,NR PIVOT BUSHING COLLAR,CLAMPING,2-1/2 ID 3-3/4 OD, 2 PIECE HEAVY LEFT WEARPAD SCREW,FHSC,CL10.9 M8X16 BOTTOM WEARPAD NUT,HX,NYL,CL10 M10 SPRING, COMPRESSION BOLT,CARR,CL8.8 M10 FLEX FLOOR...
Open the catalog to page 9
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 TRANSITION THROAT - HYDRAULIC FORE/AFT 2
Open the catalog to page 10
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Transition Throat - Hydraulic Fore/Aft Qty Description 1 THROAT, SIDEHILL 3 BUSHING,MACH,NR 2 PIVOT BUSHING 1 COLLAR,CLAMPING,2-1/2 ID 3-3/4 OD, 2 PIECE HEAVY 1 LEFT WEARPAD 1 BOTTOM WEARPAD 17 SCREW,FHSC,CL10.9 M8X16 1 RIGHT WEARPAD 1 BALL STUD 2 SEAL 2 STIFFENER, SEAL 3 BOLT,HX,FL,CL10.9 M6X12 1 FLEX FLOOR 5 BOLT,CARR,CL8.8 M10 5 SPRING, COMPRESSION 5 NUT,HX,NYL,CL10 M10 2 PIN,COTTER 1/4 8 BOLT,HX,FL,CL10.9 M12X45
Open the catalog to page 11
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 TRANSITION HEADER ADAPTER - NON HYDRAULIC FORE/AFT
Open the catalog to page 12
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Transition Header Adapter Qty Description 2 SPRING, COMPRESSION 2 LOCKOUT PIN 2 SCREW,SHC,CL10.9 M10X70 2 BACKING WEARPAD 2 BACKING PLATE 6 BOLT,HX,FL,CL10.9 M12X40 3 BOLT,HX,FL,CL10.9,M16X50 2 CYLINDER PIN 2 BOLT,HX,FL,CL10.9 M12X25 1 CYLINDER 2-1/2 X 10 2 STR,THD,RUN-06 2 CLAMP, 3/4" TWIN BEHRINGER PAIR 1 COVER PLATE,TWIN 1 SLAVE CYL ROD MOUNT 2 NUT,HX,FL,STV,CL10 M16 2 TM, GRAPHITE MICARTA 1 HEADER ADAPTER 3 BUSHING,MACH,NR 1 COLLAR, CLAMPING 1 TOP SHIELD 2 SIDE SHIELD 12 BOLT,HX,FL,CL10.9 M8X20 12 NUT,HX,FL,STV,CL10...
Open the catalog to page 13
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 TRANSITION HEADER ADAPTER - HYDRAULIC FORE/AFT
Open the catalog to page 14
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999
Open the catalog to page 15
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Carriage Overcarriage Page 17 Carriage Position Sensor Page 22 Misc. Carriage Parts Page21
Open the catalog to page 16
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999
Open the catalog to page 17
Description WASHER, QUICK REPAIR COLLAR, CLAMPING PIN, MAIN CYLINDER CYLINDER,LEVELING,DUAL CB PIVOT BUSHING 4.016ID X 4.7640D X 048 PIVOT PIN UPPER CARRIAGE SHIM BOLT,HX,FL,CL10.9,M16X35 CARRIAGE LOCK (9010) NUT,HX,FL,STV,CL10 M20 SPACER, TUBE CLAMP AXLE CLAMP -6FORFS X -6MORFS, 90 CYLINDER, CROSS PORT BOLT,HX,FL,CL10.9 M12X25 NUT,HX,JAM,CL8 M16 STACK BOLT, BEHRINGER BOLT,HX,GR5 5/16 -18 X 1 3/4 CARRIAGE SHIM BOLT,HX,FL,CL10.9 M20 BOLT,HX,FL,CL10.9 M20 CYLINDER PIN, TRIM SUPPORT, HYDRO HOSE LOWER CARRIAGE SHIM TABLE, HYDRO HOSE CLAMP 1/4" DOUBLE LOOP 3/8HOLE OVERCARRIAGE COVER PLATE,TWIN CLAMP,...
Open the catalog to page 18
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999
Open the catalog to page 19
Model JS7020 Hillco Leveling System For Serial Numbers JS7020-22001 thru JS7020-22999 Description UNDERCARRIAGE, NARROW, 96.25", STUD, DOUBLE-10.9 UNDERCARRIAGE, WIDE, 114.75" SCREW,SHC,CL12.9 M24 CYLINDER STOP BOLT,CARR,CL8.8 M10 PIN,SNAP,LCK BUSHING, PLASTIC NUT,HX,FL,CL10 M10 CAP, AXLE NARROW UNDERCARRIAGE AXLE EXTENSIONS LM WLD, 9.25 AXLE EXTENSION M24 X 3 X 110 HEX CAP CU TM, SPACER-FINAL DRIVE FW M25.4 X 50.0 X 6.0 STOVER NUT 24MX3
Open the catalog to page 20All Hillco Technologies, Inc. catalogs and technical brochures
HILLCO HARROW CART2 Pages
HILLCO AIR FLOW SYSTEMS2 Pages
HARROW CART2 Pages
WRAP TWINE REMOVER2 Pages
