GRAIN BELT HEADERS

QUALITY STANDARD FEATURES Hydraulic Header Tilt Hydraulic header tilt adjustment equipped with ball and socket on both ends improves header floatation. Adjustable Castoring Gauge Wheels Adjustment to cutting height is now a breeze – simply pull a pin and push a lever. Also, has an incredible floatation of eight inches. Low Profile Cutterbar The Honey Bee cutter height is now the lowest in the industry. In addition, the profile has been changed to reduce the height the crop has to move from the knife to the draper by 50%. Draper Speed Control Crop Divider Draper speeds are hydraulically controlled...

Lateral Leaf Spring Float System Draper Tension and Tracking The header has excellent floatation and ground-hugging capability. Lateral and vertical leaf spring suspension allows the header to float independently of the combine’s OEM accumulator floatation system. You’ll put more crop through the combine, leave less in the field, and reduce rock damage to your cutting system. The canvas can be adjusted for tracking and tightening, which allows even tension on both the front and rear of the rollers. A quick-release lever allows for ease of canvas and roller cleaning. Deck and Feed Auger Independent...

Dual Wheel Hitch Carrier Cross Auger Allows for easy towing of your combine header behind a pickup truck or combine. Easily transport your header through gates and down narrow roads. Can be used with the Detachable Storage Transport or Integral Storage Transport. Hydraulic drive cross augers assist in material flow from the drapers to the feed auger. The auger is adjustable to match varying crop conditions and increases combine capacity in bulky crops like peas and mustard. Augers are ‘size’ specific. Detachable Storage Transport Integral Storage Transport Hitch, jack and axle combination allow...

20% GREATER COMBINE CAPACITY WITH THE HONEY BEE GRAIN BELT HEADER FARMERS ARE RAVING ABOUT THIS HEADER… “ he Grain Belt does good work. It is really good in the grasses. You can cut it closer to T the ground, and it comes in a good flow to the harvester. I’ve used it on 1,000 acres of barley, wheat, rape, red fescue and other grasses. I found it followed the land better than other cutterbars. We can pick up crops with the Grain Belt if the crops are closer to the ground. It is a functional header with a good service level from the factory. It is easy to use once you have learned it. I would recommend...

GRAIN BELT HEADER SPECIFICATIONS Specifications Operating Weight, Fully Option Table Hydraulic System Self-contained hydraulic system on the header. Double gear pump with step-up gear box driven off of bottom feeder housing shaft. Header Floatation Leaf spring float system standard on all models. Cutting System SCH Easy Cut, spring steel guards, bolted sections. SCH Epicyclic 3 5/16" (8.4 cm) stroke, hydraulically driven, approximately 1,284 – 1,400 strokes per minute (depending on make of combine). Knife Drive JOHN DEERE MASSEY FERGUSON Centre Deck Hydraulically driven, 68" (172.7 cm) wide centre...