WSC GRAIN BELT SWATHER
12Pages

WSC GRAIN BELT SWATHER

MAXIMIZE MACHINERY EFFICIENCY Honey Bee lives to make harvests faster and more efficient. Available exclusively for New Holland Speedrower® PLUS and Case IH WD5 series windrowers, the WSC Grain Belt Swather table turns your power unit into a high-efficiency swather, increasing your farming productivity. Built on a platform that easily attaches to a New Holland or Case IH windrower, and with increased durability features such as a heavy-duty 3/16” (4.8 mm) tubular steel header mainframe, the WSC Grain Belt Swather is designed to last. Available in 30’ and 36’ widths, its high capacity is...

SCH CUTTING SYSTEM The SCH Easy Cut system provides smooth, superior cutting. Spring steel guards with cutting edges on top and bottom, along with alternating, bolted, heattreated sections, eliminate the need for hold downs. The system keeps dirt and debris from accumulating under the knives for increased performance in severe cutting conditions. KNIFE DRIVE The knife is driven by a 3 5/16” (8.4 cm) stroke, epicyclic knife drive that operates at 1,400 strokes per minute. The knife drive is powered by a low maintenance hydraulic drive motor. Double knife drive systems are standard equipment...

REMOTE DRAPER SPEED CONTROL Draper speeds are hydraulically controlled in-cab and are adjustable up to 750 fpm (229 mpm). Remote speed control gives you the power to quickly adjust draper speeds for varying crop conditions. HIGH PERFORMANCE HONEY BEE REEL The custom built, fully adjustable reel is hydraulically driven by the windrower. All reel funtions are controlled through the tractor’s hydraulic control valves for quick in-cab adjustment in changing crop conditions. POLYESTER DRAPERS 42” (107 cm) drapers are made of long-lasting, rubberized polyester with fibreglass-reinforced slats and...

DRAPER DRIVE The 3” (7.6 cm) diameter drive rollers provide traction in heavy crop conditions. Powered from the outside by a hydraulic motor, the drapers move the crop towards the center for more uniform feeding. REEL DRIVE The hydraulically-driven reel is easily controlled using standard in-cab controls. In-cab controls allow for quick reel adjustment in changing crop conditions. HYDRAULIC HEADER TILT No-wrench header tilt adjustment for header tilt control in varying crop conditions.

FORE AND AFT REEL ADJUSTMENT A hydraulic adjustment with in-cab control is available for fore/aft positioning for on-the-go response to changing crop conditions. DRAPER TENSION AND TRACKING The canvas can be adjusted for tracking and tightening, for even tension on both the front and rear of the rollers. A quick release lever allows easy canvas and roller cleaning. INTEGRAL STORAGE TRANSPORT The self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table.

END STRUT GAUGE WHEELS These smaller wheels mount on the ends of the table and help prevent them from digging in the dirt when operating in rolling terrain or going through drainage ditches. CASTORING GAUGE WHEELS Vertically adjustable with a screw jack and cushioned with a rubber spring for compression and rebound, the castoring design eliminates gouging when turning. Available as standard equipment on all sizes. HAY GUARD The hay guard ensures a smooth transition from knife to draper and reduces material wrapping on the rollers.

SKID PLATES UHMW skid plates are standard on all models to protect the cutterbar when cutting crops close to the ground. DOUBLE SWATH Using two shifting decks, double swath gives you in-cab control for right, left and center delivery of your windrow. The double swath option is available on all sizes.

SPEC SHEET WSC GRAIN BELT SWATHER Specifications Operating Weight Hydraulic System Header Flotation Cutting System SCH Easy Cut, spring steel guards, bolted sections SCH Epicyclic 3 5/16” (8.4 cm) stroke, hydraulically driven, approximately 1,400 strokes per minute Knife Drive Double 42” (106.7 cm) wide rubberized polyester, fibreglass reinforced rubber slats Hydraulically driven, speed adjustable from approximately 0 - 750 fpm (228 mpm) Draper Solid Reel - 15’ (4.6 m) Reel(s) Honey Bee Cam Reel - 6 bat, quick change plastic teeth, multiple spacing. Quick tine adjustment Reel Drive...

® Honey Bee is a registered trademark of Honey Bee Manufacturing Ltd. Specifications subject to change.