video corpo

FORTIS AS

FORTIS AS

FORTIS AS

Product catalog summary
Introduction
The Fortis AS is a robust cultivator designed for tractor powers up to 700 HP, focusing on flexibility and precision in soil cultivation. It features a 4-bar design with a tine spacing of 27 cm, ensuring low horsepower requirements and intensive mixing.

Specifications
The cultivator is built with a robust frame and optimum tine layout, suitable for the hardest conditions and long service life. It includes a maintenance-free TerraGrip tine system with a release force of 550 kg. The machine's design allows for a large selection of packer options for intensive consolidation.

Design and Features
The Fortis AS features a 4-bar design with a frame height of 850 mm, providing significant clearance even at maximum working depth. The tine spacing enhances mixing quality, and the TerraGrip tine system ensures low horsepower requirements. The design includes an extended last tine bar for optimal soil flow into levelling discs, achieving excellent levelling.

Weight Transfer System
The machine is equipped with a weight transfer system that increases traction by transferring a vertical load of up to 1.2 t to the tractor's rear axle. This system can be switched off if not required.

Packer Options
The Fortis AS offers three packer options: SteelFlex, double Rollpack, and OptiRoll packers. These options provide flexibility in consolidation and crumbling, adapting to various soil conditions.

Point and Wing Combinations
The cultivator supports a wide range of point and wing combinations, allowing use for various cultivation depths from shallow cutting to primary soil cultivation. The TerraGrip III system offers flexibility with different point and wing options, ensuring low horsepower requirements and excellent mixing behavior.

Packer Systems
The packer systems include SteelFlex, OptiRoll, and double RollPack packers, each designed for specific soil conditions and consolidation needs. The packers can be hydraulically pre-tensioned to adapt to changing working depths and conditions.

Technical Data
The Fortis AS is available in different working widths (5.60 m, 6.70 m, 8.90 m) with corresponding transport dimensions and axle loads. It requires horsepower ranging from 350 to 700 HP, depending on the model.

Conclusion
The Fortis AS cultivator is a versatile and robust machine designed to meet the demands of modern agriculture, offering flexibility, precision, and adaptability to various soil conditions and tractor powers.
See more

Catalog excerpts

FORTIS AS-1

tHORSCH A NEW DEFINITION OF FLEXIBILITY AND PRECISION

 Open the catalog to page 1
FORTIS AS-2

Fortis AS ROBUST FRAME AND OPTIMUM TINE LAYOUT FOR TRACTOR POWERS UP TO 700 HP ― -bar design and a tine spacing of 27 cm ensure 4 low horsepower requirement and intensive mixing ― arge selection of packer options for intensive L consolidation ― obust design for hardest conditions and long R service life ― aintenance-free TerraGrip tine system with a release M force of 550 kg and a very long service li

 Open the catalog to page 2
FORTIS AS-3

The Fortis AS is a robust cultivator that was developed from scratch. The objective was to design a cultivator that takes into account the increasing tractor horsepower and also meets the new requirement on clearance for more mixing quality of organic material. To meet all these demands, the Fortis AS has a 4-bar design which with a tine spacing of 27 cm and a frame height of 850 mm which provide an enormous clearance even at maximum working depth. The tine spacing of 27 cm helps the mixing quality. Due to the large radius of the tine deflector, the well-known TerraGrip tine system ensures a...

 Open the catalog to page 3
FORTIS AS-4

TerraCut wing TerraGrip III – release effect The TerraGrip tine system impresses due to its flexibility with regard to the various point and wing options. The low horsepower requirement and the excellent mixing behaviour are due to the curved shape and the low angle of the point. ― elease force from 500 to 550 kg (depending on the model) R ― lexible mounting of point and wing options F MulchMix wing flat MulchMix wing deep MulchMix without wing Due to the wide range of point and wing combinations the cultivator can be used for almost all cultivation depths from shallow cutting at 3 to 4 cm to...

 Open the catalog to page 4
FORTIS AS-5

PACKER SYSTEMS Rigid packer frame with single and double packers VERSATILE FOR OPTIMUM RESULTS The depth effects and the main applications of the different HORSCH packer versions. Double RollPack packer ― ide range of packer options W Rigid packer frame with double RollPack packer SteelFlex packer The rigid packer of the Fortis AS ensures an even consolidation and an enormous flexibility. Due to two additional adjustment plates, the spacing between the two packers and the height of the first packer can be set to optimum working conditions and working height. Rigid packer frame with double packer...

 Open the catalog to page 5
FORTIS AS-6

TECHNICAL DATA Fortis AS Transport width (transport position) (m) 2,99 (3.50 with mech. TerraGrip 3,99 (4.30 with mech. TerraGrip Tyre size support wheels Tyre size transport wheels Horsepower requirement (kW/hp) Implement attachment lower link Cat. III/III - III/IV - IV/IV Cat. III/III - III/IV - IV/IV Cat. III/III - III/IV - IV/IV Implement attachment adjustable drawbar Implement attachment ball head

 Open the catalog to page 6
FORTIS AS-7

Your distributor HORSCH Maschinen GmbH Sitzenhof 1 · 92421 Schwandorf Phone: +49 9431 7143-0 Fax: +49 9431 7143-9200 E-Mail: [email protected] Paper: 120g/qm Maxi Offset. The paper is certified according to the EU Ecolabel. This label is only granted for products and services whose environmental consequences are considerably lower than those of comparable products. For more details see www.eu-ecolabel.de. Printing ink: Printing ink QUICKFAST COFREE. Free from mineral oil and cobalt. Moreover, it is certified and recommended for printing according to the „Cradle-to-Cradle“ principle (quasi ”from...

 Open the catalog to page 7

All HORSCH Maschinen GmbH catalogs and technical brochures

  1. Maestro CV / CX

    11  Pages

  2. Maestro RV / RX

    11  Pages

  3. Leeb VN

    19  Pages

  4. 2023 Tiger MT

    9  Pages

  5. Terrano GX

    9  Pages

  6. Terrano FX

    7  Pages

  7. FINER SL

    7  Pages

  8. Sprinter NT

    7  Pages

  9. Packer range

    7  Pages

  10. MiniDrill

    2  Pages

  11. Terrano FM

    5  Pages

  12. Pronto KR

    5  Pages

  13. Mono TG

    48  Pages

  14. Maestro RV

    130  Pages

  15. Tiger MT

    83  Pages

  16. TOUCH800®

    85  Pages

  17. Joker CT

    9  Pages

  18. Express KR

    9  Pages

  19. Express TD

    7  Pages

  20. Pronto DC

    11  Pages

  21. Partner FT/HT

    7  Pages

  22. Horsch Terrano

    15  Pages

  23. Sprinter

    9  Pages

  24. Leeb PT

    25  Pages

  25. Leeb GS

    13  Pages

  26. Titan

    5  Pages

  27. PUE SIMA17

    61  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.