- Catalogs
- HQ Chipper Parts
- Eschlböck BIBER 84
Eschlböck BIBER 84
Eschlböck BIBER 84
Document Overview:
This technical document is a detailed parts catalog for the Eschlböck BIBER wood chipper model, dated 2022. It lists components, their specifications, materials, weights, and contact information for ordering. The document spans 26 pages and includes various mechanical parts essential for maintenance and repair of the machine.
1. Parts Specifications
The catalog provides detailed specifications for numerous parts, including dimensions, material types, thickness, and weight. Key materials used are Hardox450, Hardox500, S355 steel, C45 steel, and specialized chipper steel alloys. Thicknesses range from 3.2mm to 45mm depending on the part.
- Knife Holders and Knives: Multiple types of knife holders (top, bottom, double) with thicknesses from 15mm to 39mm made primarily from Hardox450 and Hardox500. Knives vary in size and material, including chipper steel with 8% carbon and tool steel (1.2360, 1.2379).
- Wear Parts: Wear-out metal sheets for blower houses and tubes, made from Hardox500 or armored steel, with thicknesses mostly 6-8mm. These parts include changeable plates and protective covers.
- Structural Components: Rotor axle (30HGSA steel), rotor guards, blower tube transitions, conveyor belts and rollers, feeding rolls, and spiral shafts made from combinations of Hardox, S355, St42CrMo4, and Strenx steels.
- Fasteners and Small Parts: Various DIN standard screws, nuts, washers, retaining rings, and oiling components are listed with their dimensions and strength grades.
2. Material and Weight Details
The document emphasizes the use of wear-resistant steels such as Hardox grades for durability. Weights of parts are specified to aid in logistics and handling. For example, the rotor axle weighs approximately 298 kg, while smaller knives weigh less than 1 kg.
3. Assembly and Installation Notes
Some parts include notes about bolts being included, indicating these are sold as assemblies or kits. The document also specifies left and right orientations for certain components like knife holders and spiral shafts.
4. Contact and Ordering Information
Contact details for Kristaps Eglītis at chipperparts.lv are provided throughout the document for inquiries and orders. Multiple communication channels including phone, email, and social media links are listed.
5. Summary of Critical Information
- Use of high-strength, wear-resistant materials (Hardox450/500, S355, C45, specialized steels) tailored to part function.
- Precise thickness and weight data for each component to ensure compatibility and performance.
- Availability of both individual parts and assemblies with included fasteners.
- Clear differentiation of parts by orientation (left/right) and special versions (e.g., +5mm thickness for sharpened knives).
- Comprehensive listing of fasteners conforming to DIN standards with strength grades.
Conclusion:
This catalog serves as a comprehensive technical reference for maintenance, repair, and ordering of Eschlböck BIBER wood chipper parts. It ensures users have detailed material, dimensional, and weight data to select appropriate components, supporting machine longevity and operational efficiency.
Catalog excerpts
Top knife holder (left & right) Material: Hardox450 Weight: 3,89 kg Thickness: 39mm Bottom knife holder (left & right) Material: Hardox500 Weight: 1,56 kg Thickness: 15mm Top knife holder +5 mm (for sharpened knifes) Material: Hardox450 Weight: 3,89 kg Thickness: 39mm Knife (124x62x8) Material: Chipper 8% Weight: 0,43 kg Thickness: 8mm Distancer (100x30x40) Material: C45 Weight: 0,79 kg Thickness: Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 2
Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 3
Rotor upper cover guard Knife support base Material: S355 Weight: 9,40 kg Thickness: Material: Hardox450 Weight: 10,00 kg Thickness: 40mm Rotor guard side plate Material: Hardox500 Weight: 1,05 kg Thickness: 15mm *Bolts inlucded Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 4
Knife (248x62x8) Material: Chipper 8% Weight: 0,87 kg Thickness: 8mm Double top knife holder Material: Hardox450 Weight: 7,60 kg Thickness: 39mm Double bottom knife holder Material: Hardox500 Weight: 3,00 kg Thickness: 15mm Distancer (100x30x40) Material: C45 Weight: 0,79 kg Thickness: Square nut M24x2 Material: C45 Weight: 0,15 kg Thickness: Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 5
Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 6
Bottom knife holder (left & right) Material: Hardox500 Weight: 1,56 kg Thickness: 15mm Top knife holder Material: Hardox450 Weight: 4,50 kg Thickness: 35mm Distancer Material: C45 Weight: 0,90 kg Thickness: Square nut M20x2 Material: C45 Weight: 0,08 kg Thickness: Knife (248x192x18) Material: Steel 1.2379 Weight: 5,37 kg Thickness: 18mm Knife (124x192x18) Material: Chipper 8% Weight: 2,69 kg Thickness: 18mm Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 7
Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 8
Knife (124x62x8) Material: Chipper 8% Weight: 0,43 kg Thickness: 8mm Top knife holder (straight holes) Material: Hardox450 Weight: 3,89 kg Thickness: 39mm Bottom knife holder Material: Hardox500 Weight: 1,65 kg Thickness: 15mm Bottom knife holder Material: Hardox500 Weight: 1,65 kg Thickness: 15mm Bottom knife holder Material: Hardox500 Weight: 1,71 kg Thickness: 15mm Distancer (100x30x40) Material: C45 Weight: 0,79 kg Thickness: Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 9
Bottom knife holder Material: C45 Weight: 0,15 kg Thickness: Material: Hardox500 Weight: 1,71 kg Thickness: 15mm Knife support base Top knife holder +5mm for sharpened knives (straight holes) Material: Hardox450 Weight: 10,00 kg Thickness: 40mm Material: Hardox450 Weight: 3,89 kg Thickness: 39mm *Bolts inlucded Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 10
Base for free space plate with two holes Material: S355 Weight: 7,18 kg Thickness: 40mm Free space plate with 2 holes Material: Hardox500 Weight: 0,90 kg Thickness: 12mm Price: *Bolts inlucded Price: *Bolts inlucded Base for free space plate with three holes Material: S355 Weight: 7,93 kg Thickness: 40mm Free space plate with 3 holes Material: Hardox500 Weight: 0,74 kg Thickness: 12mm Price: *Bolts inlucded Rotor axle Material: 30HGSA Weight: 297,80 kg Thickness: Wear-block for rotor Material: Hardox500 Weight: 0,84 kg Thickness: Kristaps Eglītis +371 25972719 [email protected]...
Open the catalog to page 11
Screening basket Material: Hardox500 Weight: 7,86 kg Thickness: Screening basket Material: Hardox500 Weight: 31,50 kg Thickness: Screening basket Material: Hardox500 Weight: 34,90 kg Thickness: Screening basket Material: Hardox500 Weight: 37,07 kg Thickness: Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 12
Blower tube transition Material: H500 + S355 Weight: 37,69 kg Thickness: Blower tube transition inside plates (8 pieces) Material: Hardox500 Weight: 7,30 kg Thickness: 6mm Price: *Bolts inlucded Wear-out metal sheet for blower house Material: Hardox500 Weight: 8,38 kg Thickness: 8mm Wear out metal sheet Material: Armored Weight: 8,65 kg Thickness: 8mm Price: *Bolts inlucded Price: *Bolts inlucded Wear-out metal sheet for blower house Material: Hardox500 Weight: 23,78 kg Thickness: 8mm Wear-out metal sheet Material: Armored Weight: 24,78 kg Thickness: 8mm Kristaps Eglītis +371 25972719 [email protected]...
Open the catalog to page 13
Frame for hatch cover with two handles Material: S355 Weight: 4,65 kg Thickness: Wear-out metal sheet Material: Hardox500 Weight: 13,26 kg Thickness: 8mm Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/ Price: *Bolts inlucded
Open the catalog to page 14
Wear-out metal sheet Material: Hardox500 Weight: 13,84 kg Thickness: 8mm Wear-out metal sheet for blower house (big) Material: Hardox500 Weight: 19,73 kg Thickness: 8mm Price: *Bolts inlucded Price: *Bolts inlucded Wear-out metal sheet for blower house (small) Material: Hardox500 Weight: 13,21 kg Thickness: 8mm Price: *Bolts inlucded Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/
Open the catalog to page 15
Fan wing changeable plate Material: Hardox500 Weight: 4,29 kg Thickness: 12mm Fan wing Material: S355 Weight: 12,84 kg Thickness: 12mm Price: *Bolts inlucded Kristaps Eglītis +371 25972719 [email protected] https://www.chipperparts.eu/ Price: *Bolts inlucded
Open the catalog to page 16
Wear-out metal sheet for blower tube Material: Hardox500 Weight: 10,76 kg Thickness: 6mm Blower tube split wear-out plate Material: Armored Weight: 14,35 kg Thickness: 8mm Price: *Bolts inlucded Price: *Bolts inlucded Wear-out metal sheet for blower tube Material: Hardox500 Weight: 10,80 kg Thickness: 6mm Blower tube split wear-out plate Material: Armored Weight: 14,40 kg Thickness: 8mm Price: *Bolts inlucded Price: *Bolts inlucded Wear-out metal sheet for blower tube Material: Hardox500 Weight: 14,05 kg Thickness: 6mm Blower tube split wear-out plate Material: Armored Weight: 18,67 kg Thickness:...
Open the catalog to page 17All HQ Chipper Parts catalogs and technical brochures
Mus-Max 1024 Pages
Jenz 58219 Pages
Heizohack 14-800 - 14-86014 Pages
Albach Diamant 200028 Pages