*myagriexpo

Type Iromat III

Product catalog summary

Design and Options:
The HÜDIG Iromat III irrigation machine features a special gearbox with four gears and an adjustable band brake, full casing, and a P.T.O. shaft for fast rewinding. It includes hydraulic support legs at the back, a return stop at the pipe drum, and mechanical safety shut-down against winding faults. The machine offers low pressure and total shut-down options, a fully galvanized water inlet, and a chassis with a tandem pendulum axle adjustable for three track widths (1,800, 2,000, and 2,250 mm). It also has electronic speed control with a pinion sensor, allowing for pre- and post-irrigation settings from 0-99 minutes and variable speeds from 5-200 m/h depending on water conditions. Additional features include a sprinkler skid with automatic lifting and a large-area sprinkler TWIN 160 ULTRA.

Optional Equipment:
Optional features include a choice of large-area sprinklers, a compressed air brake system compliant with the Road Traffic Act, pendulum locking of the tandem axle, a lockable turntable, hydraulic drive for the turntable, and a hydraulic support leg at the front. Other options are a pipe guidance device, supply and discharge hoses, a water meter, lighting installation, a solar panel for battery recharging, a supply hose reel, GSM control, an additional sprinkler for close range, and wide tires.

Applications:
The machine is suitable for agricultural areas of approximately 60 hectares, vegetable cultivation, special crops, and environmental protection tasks such as dust binding.

Data and Dimensions:
The machine measures 6,250 mm in length (without the sprinkler skid), 2,890 mm in width, and 4,000 mm in height. It has a track width adjustable to 1,800, 2,000, or 2,250 mm and a ground clearance of 465 mm. The weight without the PE pipe is 3,380 kg. Tire specifications are 260/70-15.3 AW 14PR. The PE pipe options include diameters of 110 mm, 120 mm, and 125 mm with varying weights and lengths.

Sprinkler Specifications:
The TWIN 160 ULTRA sprinkler offers nozzle diameters ranging from 20 to 30 mm, with nozzle pressures of 3.0, 4.0, and 5.0 bar. Water consumption varies from 26.9 to 78.0 m³/h, and the sprinkler throw range extends from 39.9 to 58.3 meters. The irrigated area ranges from 67.8 to 99.1 meters depending on the nozzle pressure and diameter.

Note:
Technical modifications and changes in the scope of supply are subject to change.

Catalog excerpts

Technical Data HÜDIG Irrigation Machine Type Iromat III Design: Options: max. 600 m special PE pipe 110 x 12,3 mm - 10 mm - 8,2 mm max. 550 m special PE pipe 120 x 12,3 mm - 11,0 mm - 9,0 mm max. 500 m special PE pipe 125 x 11,4 mm - 9,3 mm Special gearbox (4 gears) with adjustable band brake Full casing P.T.O. shaft fast rewind Hydraulic support legs at the back Return stop at the pipe drum Mechanical safety shut-down against winding faults Low pressure - and total shut-down Fully galvanized water inlet from both sides (depending on shut-down option) Chassis with tandem pendulum axle Adjustable for 3 tracks: 1.800, 2.000 and 2.250 mm Electronic speed control with pinion sensor, • • • • Pre- and after irrigation 0-99 min Different speeds 5-200 m/h (depending on water conditions) for each irrigation cycle possible Display of irrigation time Simple programming Sprinkler skid, with automatic lifting Large-area sprinkler TWIN 160 ULTRA Optional equipment: Large-area sprinkler at choice Compressed air brake system incl. operating licence acc. to Road Traffic Act (StVO) Pendulum locking of the tandem axle Lockable turntable Hydraulic drive for turntable Hydraulic support leg at the front Pipe guidance device (mechanical or fully hydraulic) Supply hose DN 100, 8 m, 108 female/male, Discharge hose DN 100, 5 m, 108 female Water meter DN 100 non-calibrated or calibrated (on request) Lighting installation Solar panel for battery recharging Supply hose reel for 10 m flat hose DN 100 GSM control Additional sprinkler for close range (electronically controlled) Wide tires Data and dimensions: Length 1) mm Agricultural areas, approx. 60 ha Vegetable cultivation Special crops Environmental protection (dust binding etc.) Sprinkler type Nozzle diameter Nozzle pressure Water consumption Sprinkler throw range (WW) Nozzle pressure Water consumption Sprinkler throw range (WW) Irrigated area Nozzle pressure Water consumption Sprinkler throw range (WW) Weight without PE pipe Irrigated area 1) Length without sprinkler skid 2) Usable irrigated area = 2 x WW –15% for overlapping and loss due to wind Subject to technical modifications and changes in

Open the catalog to page 1

Type Iromat III

Type Iromat III

Catalog excerpts

All HÜDIG GmbH & Co. KG catalogs and technical brochures