Hydro-Probe XT
Hydro-Probe XT
- Digital technology with 25 readings per second for precise moisture measurement.
- Advanced Digital Signal Processing for clear and rapid response signals.
- Multiple measurement modes for different materials and applications.
- Fully temperature compensated measurements.
- Two analogue outputs and digital RS485 communications for integration.
- Remote configuration via Hydro-Com software.
- Consistent performance with minimal recalibration needed.
- Calibration data stored within the sensor for quality control.
- Dust and color do not affect measurements.
- Construction: Stainless steel body with ceramic faceplate.
- Operating Temperature: 0-60°C, not suitable for measuring ice.
- Penetration Depth: Approximately 75-100mm depending on material.
- Refresh Rate: 25 times per second.
- Moisture Range: Measures up to material saturation.
- Analogue Outputs: Configurable 4-20mA or 0-20mA current loop, convertible to 0-10V DC.
- Digital Communication: Opto-Isolated RS485 2-wire port, with RS232, Ethernet, and USB interfaces available.
- Power Supply: +15V to +30V DC, 4W.
- Suitable for various bin types and conveyor applications to ensure representative sampling.
- RS485 network allows connection of up to 16 sensors.
- Interface options include RS232, Ethernet, and USB.
Catalog excerpts
Digital Microwave Moisture Sensor for Organic Materials GRAIN : FEED : NUTS : GRANULES
Open the catalog to page 1
Hydro-Probe XT Digital microwave moisture sensor for organic materials The Hydro-Probe XT is a rugged, microwave moisture measurement sensor designed for use in flowing materials such as grain, animal feed, nuts, pulses, oils and other organic and agricultural materials. The sensor incorporates the unique Hydronix digital measurement technique. This facilitates a choice of measurement modes enabling the user to select the most appropriate mode based on the material being measured and the precision required. The sensor is pre-optimised for grain and animal feed but may easily be re-configured for...
Open the catalog to page 2
Typical Installation The Hydro-Probe XT offers a choice of installation options to suit all bin types and conveyor applications. This ensures that the sensor measures the most representative sample of material. RS485 If Hydro-Link protocol implemented Interface Options Control System USB Sensor Interface Module A combination of up to 16 sensors can be connected on the RS485 network RS232 PC running Hydronix Hydro-Com Software Digital Measurement Benefits All microwave moisture measurement techniques measure the change in relative permittivity of a material as its moisture content changes. This...
Open the catalog to page 3
Technical Information Construction Refresh Rate Digital (Serial) Communication Body: Stainless Steel Faceplate: Ceramic RS232, Ethernet and USB interfaces available. Moisture Range The sensor will measure up to saturation of material. The sensor must be placed in the flow of material. Extension Cable Analogue Outputs Bins and Silos: Install in the neck of a bin or underneath the gate. Standard and Extension Mounting Sleeves are available to suit different bin widths. Two configurable 4-20mA or 0-20mA current loop source available for moisture and temperature. May also be converted to 0-10V DC....
Open the catalog to page 4All Hydronix catalogs and technical brochures
Hydro-Hub4 Pages
Hydro-View4 Pages
Hydro-Mix XT-EX4 Pages
Hydro-Probe SE4 Pages
Hydro-Mix XT4 Pages
Hydro-Mix4 Pages
Hydro-Probe Orbiter4 Pages
Hydro-Probe4 Pages
- Agricultural software
- Temperature monitoring system
- Real-time monitoring system
- Temperature humidity sensor
- Digital moisture sensor
- Moisture monitoring system
- Seeds and grain moisture sensor
- Farm machinery monitoring system
- Digital temperature sensor
- Windows software
- High-precision moisture sensor
- Plant software
- Monitoring system with touch screen
- Sensor software
- Rice moisture sensor
- Calibration software