Hydro-Probe
4Pages

Digital Microwave Moisture Sensor for Bins, Silos and Conveyors CONCRETE • AGGREGATES • ASPHAL

Hydro-Probe Digital microwave moisture sensor for bins, silos and conveyors The Hydro-Probe is a rugged, microwave moisture measurement sensor designed to be installed in bins, silos and conveyors in process control environments. Measuring at 25 times per second and with on-board functionality such as signal processing and averaging, the Hydro-Probe accurately measures the moisture content of material as it flows over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix Hydro-Com software. The linear output allows direct...

Typical Installation The Hydro-Probe offers a choice of installation options to suit all bin types and conveyor applications. This ensures that the sensor measures the most representative sample of material. Connectivity Up to 16 sensors may be daisy chained to connect directly to a control system via the RS485 serial communications link. Hydro-View Connection Direct Connection to Control System a Hydro-View to provide a continuous The analogue or serial interface a direct connection to an operator moisture display. It also enables integrates easily with a moisture the sensor to be easily...

Technical Information Construction Refresh Rate Digital (Serial) Communication Body: Stainless Steel Faceplate: Ceramic Moisture Range The sensor will measure up to saturation of The sensor must be placed in the flow of material. Bins and Silos: Install in the neck of a bin or underneath the gate. Standard and Extension loop source available for moisture and Mounting Sleeves are available to suit different temperature. May also be converted to 0-10V DC. Digital Inputs/Output averaging and alarm functions. Operating Temperature Extension Cable Six twisted pairs, 22AWG, 0.35mm2 conductors....