*myagriexpo

HS ECO System

Product catalog summary

Material Specifications
The gutter is made from a white polypropylene copolymer, which is 100% virgin material with UV protection. It has a planar surface and is designed to distribute load evenly across all legs. The gutter dimensions are 6.2 cm by 23 cm, with a thickness of 0.7 mm and a weight of 640 g/m².

Load and Durability
The maximum load capacity for the spacer is 40 Kg/m uniformly. The estimated lifespan of the gutter is 6 years, and the spacer is 4 years, provided they are used inside a greenhouse with temperatures between 18° - 50°C and are continuously operational.

Disinfection Recommendations
For disinfection, it is recommended to use sodium hypochlorite (NaCIO) at a concentration of 200 ppm, followed by rinsing with water. Hydrogen peroxide (H₂O₂) is also suggested.

Silicon Properties
The silicon used should have maximum adhesion and flexibility, be 100% airtight and waterproof, with tensile strength greater than 200 Kg/10 cm. It should withstand temperatures from -40º to +90ºC and be resistant to water, ice, moisture, mold, vibration, impact, compression, aging, and UV.

Additional Components
The Eco Spacer is made of polypropylene with a piece weight of 60 g and an exit diameter of 26 mm. Clips without rings and Clip-E Ø16 are also available for fixing the gutter, spacer, and drip pipe.

Catalog excerpts

Data Sheet HS ECO System international Ref. 010623 Polypropylene 0,7 mm Extended Width: 35,4 cm Weight: 640 gr/m² Out-Flow Clip without ring Ref. 030008 Polypropylene Piece Weight: 3 g. For ﬁxing the gutter, the spacer and the drip pipe. Polypropylene Piece Weight: 60 g. Exit Diameter: 26 mm. Properties Material - Gutter Polypropylene copolymer, white 100% virgin material, UV protection Maximum load - Spacer 40 Kg/m uniformly. Planar surface. All legs work equally. Estimated duration Gutter: 6 years | Spacer: 4 years * We recommend: - Sodium hypochlorite (NaCIO) concentration 200 ppm, clearing up afterwards with water. - Hydrogen peroxide (H2O2) Silicon - Recommendation - Maximum adhesion and flexibility - 100% airtight and waterproof - Tensile strength > 200Kg/10cm2 - Temperature range -40º a +90ºC - Resistant to: Wate, ice, moisture, mold, vibration, impact, compression, aging and UV the following conditions. Always inside a greenhouse. * Under Temperatures between 18° - 50° C. No periods of inactivity (should be always working) before installation and after in the greenhouse. Do not expose to inadequate agro-chemicals. Avda. Juan Carlos I, Nº 43; 4ºB Ediﬁcio Tomás Guillén 30009 Murcia (Spain)

Open the catalog to page 1

HS ECO System

HS ECO System

Catalog excerpts

All HYDROPONIC SYSTEMS INTERNATIONAL catalogs and technical brochures