Product Overview:
The document provides a detailed data sheet for the HS Strawberry Evolution System, which includes various components made primarily of galvanized steel and polypropylene. The system is designed for hydroponic strawberry cultivation.
Specifications:- HS Strawberry Evolution Support: Dimensions are 222x238x8mm, made of galvanized steel, weighing 230g.
- HS Strawberry Pot: Dimensions are 32x1.5x1500mm, made of galvanized steel, weighing 1.7kg.
- HS Evolution Gutter: Dimensions are 230x92x0.5mm, made of coated steel, weighing 1645g/m.
- HS Elevated Evolution Spacer: Dimensions are 1000x235mm, made of polypropylene, weighing 385g.
- HS Elevated Evolution Clip: Two variants, with and without ring, made of polypropylene, weighing 2g and 1g respectively.
- HS Elevated Evolution Out-Flow: Dimensions are 222x130x135mm, made of polypropylene, weighing 192g.
- HS Elevated Evolution Drain Outlet Pipe: Diameter of 38mm, made of EVA, weighing 360g/m.
Material Properties:- Metal gutter measurements include a coating with a maximum load capacity of 20 Kg/m evenly distributed.
- Face A is coated with Z-275, 6µm primer, and 20µm polyester paint, while Face B has Z-275 and 7µm primer.
Optional Components:- HS Silicone and various screws and washers are available as optional components.
Additional Components:- HS End Support Strawberry, HS Evolution Counter-Leg, and HS Strawberry Trellis Tape Support are additional components made of galvanized steel with specific dimensions and weights.
See more