*myagriexpo

HS Hydropot System

Product catalog summary

Material Specifications
The gutter is made from 100% virgin polypropylene copolymer, white in color, with UV protection. It has a planar surface and all legs work equally. The gutter dimensions are 6.2 x 34 cm with a thickness of 0.7 mm and a weight of 640 gr/m². The spacer is made from prime quality reclaimed polypropylene with a piece weight of 127 g, and the clip options include Ø16, Ø25, and without ring.

Load and Durability
The maximum load for the spacer is 30 Kg/unit. The estimated duration for the gutter is 5 years and for the spacer is 4 years, under specific conditions such as being inside a greenhouse with temperatures between 18° - 50° C and continuous operation.

Disinfection and Maintenance
Recommended disinfection methods include using sodium hypochlorite at a concentration of 200 ppm, followed by rinsing with water, or hydrogen peroxide. The material is resistant to water, ice, moisture, mold, vibration, impact, compression, aging, and UV exposure.

Silicon Recommendations
The silicon used should have maximum adhesion and flexibility, be 100% airtight and waterproof, with tensile strength greater than 200Kg/10cm, and a temperature range of -40º to +90ºC.

Catalog excerpts

Data Sheet HS Hydropot System international Clip without ring Ref. 030008 Polypropylene 0,7 mm Extended Width: 46,4 cm Weight: 640 gr/m² Ref. 020003 Prime quality reclaimed polypropylene Piece Weight: 127 g. Prime quality reclaimed polypropylene Piece Weight: 3 g. For ﬁxing the gutter, the spacer and the drip pipe (Ø16-18mm). Properties Material - Gutter Polypropylene copolymer, white 100% virgin material, UV protection Maximum load - Spacer 30 Kg/unit. Planar surface. All legs work equally. Estimated duration Gutter: 5 years | Spacer: 4 years * We recommend: - Sodium hypochlorite (NaCIO) concentration 200 ppm, clearing up afterwards with water. - Hydrogen peroxide (H2O2) Silicon - Recommendation - Maximum adhesion and flexibility - 100% airtight and waterproof - Tensile strength > 200Kg/10cm2 - Temperature range -40º a +90ºC - Resistant to: Wate, ice, moisture, mold, vibration, impact, compression, aging and UV the following conditions. Always inside a greenhouse. * Under Temperatures between 18° - 50° C. No periods of inactivity (should be always working) before installation and after in the greenhouse. Do not expose to inadequate agro-chemicals. Avda. Juan Carlos I, Nº 43; 4ºB Ediﬁcio Tomás Guillén 30009 Murcia (Spain)

Open the catalog to page 1

HS Hydropot System

HS Hydropot System

Catalog excerpts

All HYDROPONIC SYSTEMS INTERNATIONAL catalogs and technical brochures