Data Sheet HS Premium System PATENT RNATION Polypropylene 0,7 mm Extended Width: 35,4 cm Weight: 640 gr/m² Clip without ring Ref. 030008 Polypropylene Piece Weight: 3 g. For fixing the gutter, the spacer and the drip pipe. Polypropylene Piece Weight: 60 g. Exit Diameter: 26 mm. Properties Material - Gutter Polypropylene copolymer, white 100% virgin material, UV protection Maximum load - Spacer 65 Kg/m uniformly. Planar surface. All legs work equally. Estimated duration Gutter: 6 years | Spacer: 5 years * We recommend: - Sodium hypochlorite (NaCIO) concentration 200 ppm, clearing up afterwards with water. - Hydrogen peroxide (H2O2) Silicon - Recommendation - Maximum adhesion and flexibility - 100% airtight and waterproof - Tensile strength > 200Kg/10cm2 - Temperature range -40º a +90ºC - Resistant to: Wate, ice, moisture, mold, vibration, impact, compression, aging and UV the following conditions. Always inside a greenhouse. * Under Temperatures between 18° - 50° C. No periods of inactivity (should be always working) before installation and after in the greenhouse. Do not expose to inadequate agro-chemicals. Avda. Juan Carlos I, Nº 43; 4ºB Edificio Tomás Guillén 30009 Murcia (Spain)