Aerite ™ AB135 Feed Blower
1Pages

Aerite ™ AB135 Feed Blower The Aerite™ AB135 Blower is engineered as a high volume, low-pressure centrifugal blower to maximize the bulk transfer of dry, breakable materials. The Aerite™ AB135 model consists of a 35.0 cm (13.5 inch) cast Almag® impeller matched to a cast Almag® backing plate, and an engineered blower housing fitted with an inlet shroud designed to protect operators from injury while maximizing the movement of air and blower operating performance. Machined and statically balanced components are designed for maximum versatility and may be mounted on gas, diesel, electric, or hydraulic motors. To reduce wear and maintenance costs associated with pulleys and belts the Aerite™ AB135 Blower is produced as a direct drive blower unit with the associated benefits of compact size, lightweight, and portability. Aerite™ AB135 Blower units are commonly matched with our AeroSpreader™ S125 and S250 model dry pellet feed broadcasters to create a high performance feed pelletbroadcasting package. Trouble free long life operation is assured with the UV stabilized polyethylene blower housing well-suited for tough outdoor and corrosive work environments. The blower’s simple assembly design allows the unit to be easily separated from the power plant and re-installed on any comparable sized motor assembly. Both the inlet horn diameter and carefully shaped internal impeller tip clearances are optimally designed to provide high static pressure at very low operating noise. Direct Drive Construction Eliminates the time and expense of maintaining belts. Non-Corrosive Housing UV stabilized polyethylene housing will resist the worst operating environments. Aerite™ AB135 Feed Blower Specifications Blower Impeller Cast Almag® 35 cm (13.5 in) diameter with machined 19 mm (0.75 in) hub and 4.7 mm (0.1875 in) diameter shaft key. Dynamically balanced. Backing Plate Cast Almag® 39 cm (15.5 in) diameter. Machined face with various mounting bolt patterns to allow for alternate power sources. Blower Housing UV stabilised rotational molded polyethylene. 14 cm (5.5 in) diameter with fitted powdercoated steel inlet horn and safety screen. Power Source 5 Kw (6.5 HP) Gx20- Honda power plant c/w low oil alert. Standard machined shaft and backing plate bolt patterns provide for alternative gas, diesel, and electric power plants. Machined and Statically Balanced Impeller Smooth operation at high speed. One Piece Cast Impeller Almag® cast and machined impeller ensures productoperating longevity. IAS Products Ltd. E: info@iasproducts.com www.iasproducts.com T: +1 604.924.1844 F: +1 604.924.1848 1408 Crown Street, North Vancouver, BC Canada V7J 1G5