MDM1750-2150
1Pages

DRUM MOWER MDM1010 MDM1345/1355/1365 1 Drum type Reliable and low power requirement Drum mower. Double spring suspension Quick folding with Manual / Hydraulic / Electric High mobility, less tractor power, speedy cutting With compact design and 3 point hitch direct connecting, it can work easily in a small field. For working with a small sized tractor, adapted tractor Hp is set from 11kw (15PS). MDM1010 has 1 drum and 3 knives. Special designed tall drum convey cut material backward efficiently and speedy operation is expected. In mowing operation, cutting level must be kept evenly in the range of cutting width. 2 suspension springs work as the top and bottom edges keep the same level and follow the ground. Folding backward for transportation Cutting frame can be folded to rear during transportation with pin insertion. Overload protection Universal joint with one-way clutch Release bar sways cutting frame to rear when impact shock from the ground occurs. The universal joint’s one-way clutch cuts off drive force of inertia when the tractor PTO stops suddenly. When moving on the road, machine width must be minimum with cutting frame folded. MDM 13 series adopts a 3 folding system. You can select folding type to your tractor specification or your request. Hydraulic folding needs 1 hydraulic output (single action) of the tractor, electric folding needs DC12V as power supply. Universal joint is equipped with a “one-way clutch” inside. It cuts off the drive force of inertia when the tractor PTO stops suddenly. In case of an unexpected overload or impact from foreign objects on the field, the release bar is equipped as standard to protect the cutting frame from damage. In case the cutter bar catches a root on the ground, the release bar works and then the cutting frame can be swayed backward. Also it works effective on soil choking and grass clogging. Folding method Working speed (km/hr) Working capacity (are/hr) Folding method Working speed (km/hr) Working capacity (are/hr) Corresponding to the slope operation On slopes such a bank or causeway, the cutting frame can be set as illustrated with a simple adjustment. Cutting frame can be inclined to a maximum 40 degrees below the horizontal. Hydraulic Electric Remarks : ( ) data is at transportation. Working capacity subject to change depending on the type and/or moisture content of material. Figure, technical date, dimensions and weights are subject to change without notice. 1061-2 Kamiosatsu, Chitose-shi, HOKKAIDO 066-8555 TEL +81-123-26-2210 FAX +81-123-26-2412 E-mail star@ihi-star.com Website http://www.ihi-star.com/engl