AIR NOZZLE CATALOG
24Pages

AIR NOZZLES provide solutions for problems in manufacturing plants. There are many areas in which air nozzles can make a difference; including productivity, product quality, cost cutting, noise reduction, and more. IKEUCHI, the Fog Engineers, to meet any customer demand, provides an extensive variety of products, from compact nozzles to entire systems, for applications from narrow spaces to large-scale lines. Usage examples

Multi-orifice Flat Spray Nozzles HFseries Description for thread size and type (pipe connection size) Threads noted in this catalog are tapered pipe threads (PT) unless otherwise specified. "M" denotes male thread and "F" denotes female thread. (Example) 1/4M: 1/4" male taper pipe thread, R1/4 1/4F: 1/4" female taper pipe thread, Rcl/4 Materials/ Specifications • Materials are described as follows in this catalog. •Air consumption (air volume) specified in this catalog is for reference only, not guaranteed. • Specifications of the products and contents of this catalog are subject to change...

The special configuration of ^TA.IF'UJet® takes in surrounding air and boosts powerful air flow. Designed to have a uniform and efficient air flow, ,£TAIF'UJet® also excels at producing a quiet and solid stream of high impact air. I Save on Air Cost / High Spray Impact FAIFUJet®, uniquely designed to take in surrounding air and multiply air flow, produces a powerful air blow with high spray impact and minimal air consumption. FAIFUJet® is designed to have minimal noise levels. Available in Flat type and Round type, depending on your usage. Spray condition Background noise: 58 dB(A) Spray...

Flat Type Plastic 42 mm wide Short type TAIFUJet. series FEATURES •Uniform distribution resulting from the unique flat design. •Made of high chemical/heat resistant PPS. •Designed to have minimal noise level. [Spray pattern] ► Compact, much shorter body (35 mm long) compared to the conventional 42 mm wide type. ► Uniform distribution resulting from the unique flat design. Material: PPS Mass: 9 g Max. air pressure: 0.7 MPa (100 psi) Max. allowable temperature: 120°C (240°F) 121 mm wide Broad type ► Powerful air nozzle dramatically multiplies the supplied air volume. ►Spray width is three...

► Uniform distribution resulting from the unique flat design. ►42 mm wide standard flat air nozzle with 01.0 mm orifice. ► Ultra-compact air nozzle (24 mm wide, 30 mm long) with equal high spray impact and minimal noise level. ►Compact enough to install in a narrow space, such as for blow-off drying in corners. 24 mm wide Compact type Adhesive is used for assembly of some parts. Please inquire or order for a specific nozzle using this coding system. 1)42 mm wide type 2 24 mm wide, compact type

Flat Type Stainless Steel 42 mm wide TAIFUJer. series FEATURES •Powerful air nozzle dramatically multiplies the supplied air volume. •Uniform distribution resulting from the unique flat design. ►42 mm wide standard flat air nozzle, available in three orifice diameters: $0.8, $1.0, or $1.2 mm. ► Made of stainless steel with high resistance to shock and heat. 50 mm wide ►Compact and wider flat air nozzle, 50 mm wide and 65 mm long. How to order Please inquire or order for a specific nozzle using this coding system. <2 50 mm wide type <T<42 mm wide type <Example> ’AM (PT) TF-F 42-16-010...

Long Flat Type Stainless Steel FEATURES •Long flat type designed for blowing air over greater widths. • 13 spray width types, 100 mm-1,400 mm, are available. •Space-saving design, suitable for narrow places. •Air inlet connection at both ends available for size 500 mm and longer, yields more space savings. •Made of stainless steel with high resistance to shock and heat. Max. air pressure: 1.0 MPa (140 psi) Max. allowable temperature: 400°C (750°F) ■One-end connection type Product code ■Both-end connection type Product code Product code •For both-end connection type, pipe connection size is...

FEATURES •High impact solid stream of air blown from eight holes. •Standard round type air nozzle for high-impact, pinpoint blowing. •Compact design, lightweight. •Quiet operation with noise level reduced by more than 10 dB (A) compared to conventional one-hole air nozzle. •For applications which require high spray impact air blow into gaps and narrow spaces (pipes, etc.). Stainless] ^Made of stainless steel S316L with high resistance to shock, heat and chemicals. Steel ►Two pipe connection size types, 1/8M and 1/4M, and five orifice diameter types, 00.8 mm-01.6 mm, are available. ► Use in...

For compressors Cluster Header 3-Cluster Header V_I_/ FEATURES •Header with a cluster of multiple round-type stainless steel air nozzles. •The unit is made of a cluster of nozzles. One cluster can be equipped with 4, 5, or 7 nozzles upon request. •Also available is the multiple-nozzle triple cluster type, consisting of three clusters of multiple-nozzles in one unit, for application of stronger power. Cluster header ©Nozzle ©Header ©Adaptor •© = 1/4M round-type stainless steel air nozzles • Total air volume = Air volume for 1 pc. of round-type stainless steel air nozzle x the number of...

TAIFUJer. series FEATURES •Air nozzle with a 42 mm wide even jet. •Blower air nozzles, reducing energy cost to one-third of that for compressed air driven nozzles. •Unique design combining air-amplification, even air flow distribution, and low-noise capabilities. Material: ABS Mass: 26 g Max. air pressure: 100 kPa (14 psi) Max. allowable temperature: 80°C (170°F) FEATURES • Blower air nozzles, reducing energy cost to one-third of that for compressed air driven nozzles. •Unique design combining air-amplification, even airflow distribution, and low-noise capabilities. ►Air nozzle with...

TAIFUJet. series For blowers f-> FEATURES •Blower-air driven, long flat type for air blowing over greater widths. •Space-saving design, suitable for narrow places. •Made of plastic resin (PPS nozzle tip and HTPVC pipe header) or Aluminum. •Configured as combinations of 03 mm orifices in 42 mm-wide tip units. Available in lengths of multiples of 42 mm. ► Lightweight plastic, long type. Material: PPS (nozzle tip), HTPVC (pipe header) Orifice diameter: 3.0 mm Max. air pressure: 100 kPa (14 psi) Max. allowable temperature: 80°C (170°F) STANDARD PLASTIC MODELS ■1”, 210 mm spray width Nozzle...