Catalog on Plastic Nozzles
12Pages

■ How to Read the Chart All IKEUCHI’sprecision-made hydraulic nozzles are guaranteed for the initial spray capacities and spray angles. ■ SPRAY CAPACITY ±5% Spray capacities shown in this catalog are based on city water of room temperature and all spray nozzles are guaranteed for the initial spray capacity within ± 5% under the standard pressure. ■ SPRAY ANGLE ±5° Based on city water of room temperature, all spray nozzles are guaranteed for the initial spray angle within ±5° under the standard pressure. [Note] The standard pressure is defined as a design pressure based on usual liquid pressure in common use. The nozzles are designed to provide the specified spray angle, spray capacity, optimum spray pattern and spray distribution at each standard pressure. The standard pressure is indicated in each table. *The figures in this catalog are based on city water of room temperature and the liquid pressure is the one at the immediate upstream of the nozzle. Plastic Nozzles VP CERTIIM* • Highly wear- and chemical-resistant plastic spray nozzle with injection molded ceramic orifice. • Flat spray pattern with stable distribution having tapered spray pattern edges. • Tapered spray pattern edges provide uniform spray distribution in multiple-nozzle arrangement. Washing : Cars, vehicles, containers, films, felts, filters, screens, bottles, gravel, stones, sand, metal parts, steel plates, machines, etc. Spraying : Choto-etching, oils, lubricants, liquids, solutions, insecticides, herbicides, etc. Water screen : Cust suppression, deodorization, etc. -• Spray pattern and spray distribution [Cpray Pattern] [Cpray Distribution] f Spray angle code at the standard pressure (115‘) • Spray angle at the specified pressure (124' at 0.7MPa) • Spray capacity code at the standard pressure (0.31 /min) • At 0.05MPa, sufficient spray pattern is not available Sauter mean droplet diameter measured by Immersion sampling method ■Materials of spray nozzles As "The Mist Engineers", we, IKEUCHI, have been developing the nozzles in a variety of materials to meet the desires and applications of our customers. We had developed ceramic orifice-inserted spray nozzles and succeeded in marketing them for the first time in the world. The materials of nozzles and parts are shown as follows. Materials Items 0—Suitable △—Possible in short term x—Unusable ( Plastics ) PVDF: Polyvinylidene fluoride PTFE: Polytetrafluoroethylene PP:Polypropylene FRPP: Glass-fiber reinforced polypropylene HTPVC: Heat-treated polyvinyl chloride PVC:Polyvinyl chloride PPS:Polyphenylene sulfide ABS:Acrylonitrile butadiene styrene PA:Polyamide Polyester elastomer Soft fluororesin ( Ceramics ) CERJET® Ceramics NBR:Nitrile rubber EPDM: Ethylene-propylene rubber FEPM: Tetrafluoroethylene-propylene rubber Type & Size of pipe connection: 1/4M- l/4"Male thread (FT), Rl/4 1/4F-1/4" Female thread (PI), Rcl/4 9 Calculated spray capacity at the specified pressure (0.21 JJ/min at 0.15MPa) Spray capacity at the standard pressure 9 (0.301/min at 0.3MPa) Minimum passage diameter * Spray pattern means the cross sectional shape of spray and spray distribution means the spray flow distribution in the direction of spray width. IContents Materials Spray nozzles made of metal are avai

Actual application KBN is suitable to following applications sav OAdlH OAd dd 3dld dQAd dQAd Vd KBN CERIUM® FEATURES • Hollow cone spray nozzles with extremely fine spray and ultra small capacity. It sprays the finest atomizing in hydraulic spray nozzles. • Less clogging structure because free passage diameter is 1.3-2.6 times bigger than that of conventional product. • Adopt high purity alumina ceramic to keep finest atomizing for long period even if under high pressure conditions. [Spray Pattern] STRUCTURE MATERIALS ©Body ©Closer © Spring (SUS304) @ Poppet (NBR) © Strainer(SUS304) ©...

Plastic Nozzles Iplasti^^^nozzles PA PVDF PVDF PTFE PP PVC HTPVC PPS ABS FRPP VP CERTIIM® FEATURES • Highly wear- and chemical-resistant plastic spray nozzle with injection molded ceramic orifice. • Flat spray pattern with stable distribution having tapered spray pattern edges. • Tapered spray pattern edges provide uniform spray distribution in multiple-nozzle arrangement. APPLICATIONS Washing : Cars, vehicles, containers, films, felts, filters, screens, bottles, gravel, stones, sand, metal parts, steel plates, machines, etc. Spraying : Photo-etching, oils, lubricants, liquids,...

Plastic Nozzles ^^lasti^^^nozzles PA PVDF PVDF PTFE PP PVC HTPVC PPS ABS FRPP FEATURES • Highly wear- and chemical-resistant plastic spray nozzle with injection molded ceramic orifice. • Even flat spray pattern with uniform distribution across the entire spray area. • Even spray impulse across the entire spray area. APPLICATIONS Washing : Cars, vehicles, containers, films, felts, filters, screens, bottles, gravel, stones, sand, metal parts, steel plates, machines, etc. Spraying : Photo-etching, oils, lubricants, liquids, solutions, insecticides, herbicides, etc. Water screen : Dust...

FRPP ABS PPS HTPVC PVC PP PTFE PVDFH PVDF ^ PA 10 Please inquire or order for a specific nozzle on this coding system. *The code of 1/4" thread JJRP is 1/4X1/8 MJJRP XX PVDF Pipe Conn. Size 005 Spray Capacity Code PVDF /a M Pipe Conn. Size 010 Spray Capacity Code HOW TO ORDER ■■ BBXP-PVDF ■■ ■■ JJRP-PTFE ■■ !VM VM Please inquire or order for a specific nozzle on this coding system. 015 Spray Capacity Code (GRA) Nozzle Color Code /a Ml JJRP 005 Pipe Conn. Size Spray Capacity Code

PLASTIC NOZZLES ISVV-PP PA PVDF PVDF PTFE PPH PVC HTPVC PPS ABS FRPP Patent pending FEATURES • Flat spray pattern with uniform distribution having tapered spray pattern edges. • Quick installation and removal by just turning a nozzle 90° by hand. • Ideal for saving maintenance time and applications requiring accurate reproducible alignment of nozzles. • Nozzle bodies are color-coded by spray capacity for easy identification. APPLICATIONS h Washing Etching, stripping, chemical treatment, etc. [Spray Pattern] [Spray Distribution] Plastic Nozzles Quick-detachable Specialized for...