THE 57 SERIES IMANTS REVOLUTION One pass cultivator, 2.5 hectares per hour! since 1885 1885 Main tillage and seed-bed preparation, possibly in combination with a planting machine, can now be done in one single pass covering unprecedented large acreage. More than ever, the well-known advantages of spading such as mixing the soil thoroughly, improved water management, breaking up the plough pan and the improved use of fertilizer remain valid. The large and power driven Spiro Roller is placed behind the spade shaft. It ensures that the seed bed is very evenly formed as this is necessary for the germination of seed. The machine is fitted as standard with an accumulator with a gauge that can be used to reduce the ground pressure of the rear "Spiro" roller resulting is 10% more fuel efficiency. This can be necessary when heavy seeders are added on or if the soil does not have sufficient bearing strength. The spading machine has an ideal working speed of 9.0 km/h, which amounts to an output of 2.5 hectares per hour. In order to reach this speed, the machine is equipped with a spade shaft fitted with 6 spade arms per rotor. Due to the large diameter of the spade shaft it is possible to incorporate large amounts of crop residue into the biologically most active and oxygenated topsoil. Spade shaft version Models Ideal working depth Working width Number of Number of spade banks spades Power demand Ideal working Spade shaft speed version

imants B.V., P.O. Box 2, 5540 AA Reusel, The Netherlands Tel: +31 (0)497 642433, Fax: +31 (0)497 643205, E-mail [email protected], www.imants.com Heavy duty gearing with planatairy gearboxes Option, tow frame with trailer coupling, to pull imants CombiCarrier or potatoplanter Tilling with 57 series Imants Revolution is cheaper than with a plough. Just compare your passes with the 57 series Revolution spading machine and you will reach a surprising conclusion: it is cheaper, more efficient and germination is better as a result. In other words, it saves money! By combining the spading machine with...