Document Overview

This technical document provides data related to water level measurements and corresponding water flow rates for a device or system identified as "I-Classic 22" (No. 02.04.12200). The measurements were taken at an ambient temperature of 20°C.

Key Sections and Data

Terminology and Units

• Water level is indicated in centimeters (cm).
• Water flow rate is measured in milliliters per minute (ml/min).
• Multiple languages are used to describe terms such as "pushed in," "water," "level," and "water flow rate," indicating multilingual usage or international standards.

Measurement Data

This table shows a direct relationship between increasing water level and increasing water flow rate.

Critical Information and Recommendations

• Measurements are standardized at 20°C ambient temperature, which is important for consistency and reproducibility.
• The data can be used to calibrate or verify the performance of the "I-Classic 22" device in terms of water flow relative to water level.
• Understanding this relationship is essential for applications requiring precise water flow control or monitoring.