OLIVE HARVESTER l/CnnHAPC /T [FIXED AND TELESCOPIC] VUUUUHUr/

Personal protection equipment 4 General product view 5 Telescopic pole adjustment 9

WARNING. Read all the safety warnings and all the instructions. Failing to heed warnings and follow instructions may lead to an electric shock, a fire and/ or serious injury. Keep all warnings and instructions for future reference. The term "tools" in the warnings refers to your battery-powered electric tool (with power cord), or your tool operating on a battery (without power cord). Observe all country-specific waste disposal rules and regulations. > Power tools must not be disposed of with household refuse. > The device, accessories and packaging must be taken to a recycling center. > Ask the...

• 12 rods * (including 2 extra) - ref. EB350 • 1 size 10 mixed wrench - ref. CLEMIXTE10 Vibrating head These specifications are given as an indication only. Under no circumstances may they be considered as contractually binding.They are subject to modification without prior notice in the interests of product development. Patented equipment.

User guide First use The first time you use the equipment, we strongly recommend you to ask the advice of your dealer, who is qualified to give you all the advice you need for correct use and good output. It is imperative to carefully read the tool and accessory user manuals before handling or powering up the tool. Fitting the combs Please ask your dealer for advice on fitting the combs. Incorrect assembly can cause wear on the combs or rods. Rod mounting on right comb Rod mounting on left comb screwdriver ref. E710 Using the INFACO E710 screwdriver is strongly recommended to avoid damaging the...

Comb lubrication in the drive area during initial assembly: Mounting on right comb head Mounting on left comb head

Installation and connection Only use INFACO brand reference LB850B batteries with a 48 Volt power supply. Any use with batteries other than INFACO compatible batteries may lead to damage. The warranty on the motorized handle will be void if batteries other than those manufactured by INFACO are used. In wet weather, it is imperative to carry the battery vest under waterproof clothing to keep the battery unit protected from the damp. Connect the power cable Switch on: ON/OFF button

Telescopic pole adjustment

• Do not start the tool in the locked position; • As soon as the tool jams due to excessive resistance, the electronic system stops the motor then restarts automatically after a short pause; • As long as the resistance persists, the tool will stop and automatically restart 5 times. After those 5 times, the tool stops completely and must be restarted: see the "User guide" section; • If the tool continues to jam despite the absence of resistance, contact the distributor for a post-sales return. • The tool has an electronic system that stops the machine if the temperature becomes too high; • After...

Lubrication and cleaning Use INFACO grease gun ref 952P (pump) + 952G (grease cartridge). Weekly lubrication: grease the comb drive area once a week using the grease points on the left comb. Greasing the 8-rod head option machine: the upper comb (left comb) must be removed to grease the drive area (see next section). Once every season, clean the comb drive area. Comb drive zone (for 8-rod option machine greasing and cleaning)

Advice Keep your work environment tidy to reduce the risk of accidents Take into account the work environment. Do not expose electric tools to rain. Do not use electric tools in a damp or wet environment. Make sure the lighting is optimal and sufficient. Do not use electric tools near inflammable liquids or gases. Protect yourself from electric shocks. Avoid bodily contact with grounded surfaces such as battery chargers, electric multi-plugs, etc. Keep away from children! Do not allow third parties to touch the tool or cable. Store your tools in a safe location. When not in use, tools must be...

Safety instructions Work area safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. When working at height, use appropriate and adapted resources (scaffolding, platform, etc.). Electrical safety Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter...

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached...

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with...

This warranty declaration can be made online at www.infaco.com, using the QR code opposite , or using the form to be returned on the following page (outside France, the warranty declaration must be made online).Do not hesitate to ask your approved INFACO dealer for assistance in completing your INFACO manufacturer's warranty declaration.I WARRANTY CONDITIONS Your tool can have a two-year warranty for manufacturing defects or faults. The warranty applies to the normal use of the tool and does not cover: • damage due to poor maintenance or lack of maintenance; • wear parts; • tools that have been...