Irrigation FLow Meter
4Pages

{{requestButtons}}

Catalog excerpts

Irrigation FLow Meter - 1

Table of Contents 1.0 Introduction……………………………….. 2 1.1 Meter Diagram……………………….. 2 1.2 Features………………………………. 2 2.0 Specifications…………………………….. 3 3.0 General Meter Operation……………….. 4 3.1 Nozzle Boot Use……...……………… 4 3.2 Taking a Measurement……………... 5 3.3 Setting Display Units.……………….. 5 3.4 Turning Meter Off………..

Open the catalog to page 1
Irrigation FLow Meter - 2

Measurement Range: .08-25.0 GPM, .30-96.7 L/min, 20-5800 L/hr (Gallons are US Gallons) Accuracy: Greater of +/- 4% or one digit (Meter must be held steady during fill for best accuracy) Resolution: 0.01 GPM (.08 – 9.99 GPM) or 0.1 GPM (10.0 – 25.0 GPM) 0.01 L/min (0.30 – 9.99 L/min) or 0.1 L/min (10.0 – 96.7 L/min) 10 L/hr (20 L/hr – 5800 L/hr) Battery: Two (2) “N” size alkaline batteries (included) Battery Cover Battery Life: 2 years, meter has low battery indicator Size: 8.0 in (20.3cm) tall by 8.0 in (20.3 cm) diameter Weight: 1.2 lbs (545 g) weight Construction: Break resistant plastic...

Open the catalog to page 2
Irrigation FLow Meter - 3

3.0 General Operation Note: See Demo Video on www.YouTube.com (Search SpotOn Irrigation Flow Meter) 3.1 Nozzle Boot Use The meter comes with a reuseable “Nozzle Boot” to facilitate taking readings on irrigation nozzles. (See Fig. 1 and Fig. 2 above) Additional nozzle boots can be ordered from Innoquest by specifying Item # 26350. Press the START button to turn the meter on. The LCD will flash “000” momentarily indicating it is working properly. The LCD will then show a “_” marker to indicate the type of measurement units the meter will use when displaying readings. The meter will then show...

Open the catalog to page 3
Irrigation FLow Meter - 4

The meter will turn on any time the START button is pressed. The meter can be turned off in two ways: 1. The meter can be shut off by pressing and holding the START button for several seconds (about 3 seconds). As soon as the LCD goes blank, release the START button. 2. The meter will automatically shut off after 90 seconds of inactivity. This means that the user does not have to shut off the meter after use since it will eventually shut itself off. 3.5 Installing New Batteries (use N size 1.5 volt only) The batteries are housed under the black cap on the top of the meter. This black cap...

Open the catalog to page 4

All Innoquest catalogs and technical brochures

  1. PAPER

    1 Pages

  2. TEMP PROBE

    1 Pages

  3. PAPER

    1 Pages

  4. temp probe

    1 Pages