Catalogs >
Irritec >
EXL

EXL
1Pages

Catalog excerpts

STATIC FOGGERS EXL - FOGGER Applications: • Mainly used for climate control: temperature reduction and increase in air humidity. • Used for germination and rooting. • Suitable for temperature control in greenhouses, poultry farms and farms. Characteristics: • The tiny drops allow evaporation in the air, reducing ground wetting. • The vortex design breaks the drop of water into a light mist. • Modular, light and easy to install. • Construction in three parts with sealing O-Ring. • Raw materials selected to be long lasting: Body: Polyester (PBT), O-Ring: EPDM. • Nominal flow rate at 3.5 bar. • Working pressure from 2.5 to 5.5 bar. • Coverage diameter: 60-120 cm. • 360° jet. • Trajectory angle: 80° to 100°. • Average size of drops: 60 to 100 micron. • Spacing: based on application. Consult the specific section or contact your dealer. • Conical plunger f. • Single nozzle or assembly on cross-shaped fitting for T (2 heads) and cross-shaped (4 heads) use. • Use with a 15-30 cm stabiliser and always with a non-drip valve 530-Y, at high pressure (opens at 3.5 and closes at 2.0 bar). • Installed with the NDV (Non Drip Valve) it enables the side lines of water to be kept full, avoiding dripping from the foggers and water savings. • Recommended filtration: 200mesh=75micron. • All the components added to the standard model are supplied disassembled. EXL flow rates l/h for pressures indicated. Single head data Pressure (bar) 3,5 3,9 4,2 Actual flow rate l/h NOZZLE colour Nominal flow rate l/h Irritec S.p.A.- Via Gambitta Conforto, C.da S. Lucia - 98071 Capo d’Orlando (Me) - Italy Tel. +39 0941922111 - Fax +39 0941958

Open the catalog to page 1