Catalogs >
Irritec >
P5

P5
2Pages

Catalog excerpts

Excellent supply uniformity Light dripline with flat dripper and long labyrinth The P5 is the light dripline with flat dripper and long labyrinth. Thanks to the larger labyrinth section, it is ideal in the event of difficult water. It also offers a vast range of spacings over 60 cm and is indicated for high flow rates and in the cases in which large volumes of water are necessary in a short time. Characteristics and advantages • Maintains all the excellent characteristics of the dripline P1. • The long labyrinth guarantees high performance in terms of supply uniformity. • The larger labyrinth section makes it ideal in the event of difficult water. • It also offers a vast range of spacings over 60 cm and is indicated for high flow rates and in the cases in which large volumes of water are necessary in a short time. • The vast availability of the spacings allows application not only on vegetable crops in the open field, but also fruit crops, for emergency and grafting irrigation. • The particular positioning of the filter turned to the centre of the tube allows water into the labyrinth far from stagnation areas. • The excellent uniformity performance and the possible combination of low flow rates of the dripper with vast diameters (up to 29 mm) allows very long branches to be laid. • The particular design of the labyrinths reduce pressure sensitivity and increases the self-cleaning effect thanks to the level of turbulence developed.

Open the catalog to page 1

LABYRINTH WITH LARGE PASSAGE LIGHT DRIPLINE WITH FLAT DRIPPER AND LONG LABYRINTH Dripline technical data Field of application crops Dripper characteristics Actual flow rate Protected flow The protected flow system devised by the Irritec® research and development department allows the P5™ to be buried in the soil without problems caused by aspiration of mud and detritus, and reduces the risk of root intrusion to a minimum. Available on P5 6-8 mil and P5 ULTRA 1012 and 15 mil, in the flow rates 1.10-1.50-2.10-2.80-3.80 Nominal internal diameter Pressure - Flow Rate Ratio Actual flow rate...

Open the catalog to page 2