Catalogs >
I.S.E. Srl >
200B Series

200B Series
2Pages

Catalog excerpts

Globe/Angle configuration Body and bonnet in PVC cover, the 200B series offers valves resistant to UV rays and even to corrosion being equipped with stainless steel screws. Both the Features Internal and external manual bleed Flow control base and the top of the structure are reinforced making this range among the most resistant in the market. Slow, anti-water hammer closing Synthetic rubber diaphragm reinforced with double rib Captive Solenoid (the plunger is retained in the solenoid) O-Ring gasket on unused inlet cap guarantees hermetic seal and does not require Teflon Specifications Flow Range: 4,8-36,0 m3/h (80-600 l/min) Solenoid 24VAC – 50Hz − Inrush current 0,34 A − Holding current 0,20 A Options Accepts Irritrol Ominireg pressure regulator I.S.E. S.r.l. may change product specifications without prior notice and without liabil

Open the catalog to page 1

In 1 The ribs in the cover contribute to reinforcing the valve structure The diaphragm reinforced with double rib ensures protection against leaks The cap to close the water inlet from the bottom and the O-Ring allow installing the valve in a straight line and at an angle The thicker PVC edge makes the valve even more durable over time

Open the catalog to page 2