Icod Plus

Icod Plus

Icod Plus

Product catalog summary
Overview: The document describes the Icod Plus system by I.S.E. S.r.l., which is a cod-decod system used for irrigation control. It consists of a control unit that codifies signals from a controller and retransmits them through two unpolarized wires to a decoder. The system supports three types of decoders for solenoid valves, main valves, and pump control.
Specifications: The system can handle inputs ranging from 8 to 48, depending on the number of modules installed (up to 6 modules). It supports a maximum of 4 decoders per area or 3 valves per decoder. The system is adaptable to all programmers except those with open circuit alarms. The decoders are identified by a six-figure code read automatically by the control unit.
Features: The Icod Plus system allows manual activation of stations without a control unit, has four types of alarms for potential issues, and supports software updates and parameter modifications via an RS232 socket. It includes extractable terminals for easier wiring, a multilingual system, and resin-bonded decoders with IP68 rating for up to 50 cm depth. The PVC container is suitable for indoor/outdoor use with an IP56 rating.
Technical Details: The input power is primary 230 VAC, 50/60Hz, and secondary 7 VAC, 400 mA. The 2-wire output power is 46 VDC, max 2 A. The system operates within a temperature range of -5° to +50° C. Terminal boards support inputs up to 48 and outputs up to 6 mm.
Codification and Components: The document lists various codes for different components, including the 16-station Icod coder, main valve decoder, pump control decoder, and multiple field decoders for 2, 4, and 6 valves. An internal 8-station expansion module is also available.
Installation and Wiring: The document provides details on maximum cable lengths based on cable section and specific resistance, with varying lengths depending on the number of valve decoders connected simultaneously.
See more

Catalog excerpts

Icod Plus-1

Icod Plus Inputs 8, 16, 24, 32, 40, 48 depending on the modules installed (max 1 to 6 modules) Max 4 decoders per area or 3 valves per decoder Adaptable to all programmers (not to those with open circuit alarm) cod Plus, the Irritrol cod-decod system. Made up of a control unit (Icod Plus), that codifies the signals from the controller, retransmit them through two unpolarized wires, and a decoder that decodes the signal transmitted (by the control unit). There are three types of decoders: one for the solenoid valves, one for the main valve and another for the pump control. Thanks to the six keys display, the programming is quick and easy even for not professional installers. Features The decoders are identified by a six-figure code which is read automatically by the control unit Activation of the stations in manual mode, without the need for a control unit to give the command 4 different types of alarm which identify potential problems, such as open circuit, overload, short-circuit and a generic one Possibility to update the software and to modify the operating parameters (delay times between one decoder and another, EV maintenance voltage, alarms, etc.) through an RS232 socket for connection to PC. Possibility of changing the impedance to better adapt to the various electrical conditions of the system Extractable terminals to facilitate system wiring Multilingual system Resin-bonded decoder IP68 (up to 50 cm depth) PVC container for indoor/outdoor use (IP56), removable cover with 4 screws, for wall-mounting I.S.E. S.r.l. may change product specifications without prior notice and without liability

 Open the catalog to page 1
Icod Plus-2

Icod Plus Input sensor power: N.F. switch Output alarm power: N.C. or N.O. relay, 230VAC, 10 Amp Input power: − primary 230 VAC, 50/60Hz − secondary A: 7 VAC, 400 mA Terminal boards: − Inputs: (1,2,3,….,48) 1 mm − Output: max 6 mm Temperature: from -5° to +50° C 2 wire cable Controllers Coders Decoders Valve C D Decoder Expanding module Maximum cable lenghts Number of valve decoder connected to only solenoid activated simultaneouslyù Specific resistence (Ohm/km) Codification Code IT -ICODPLUS IT -IDECODM IT -IDECODP IT -IDECODPLUS IT -IDECODPLUS-L IT -IDECODPLUS-2 IT -IDECODPLUS-4 IT -IDECODPLUS-6...

 Open the catalog to page 2

All I.S.E. Srl catalogs and technical brochures

  1. LIFE™ DC

    2  Pages

  2. Junior Plus

    2  Pages

  3. Junior Max

    2  Pages

  4. Rain Dial

    2  Pages

  5. MCE MAN

    40  Pages

  6. S Series

    2  Pages

  7. 200B Series

    2  Pages

  8. Kwik Dial

    2  Pages

  9. MC-E

    2  Pages

  10. Minisat

    4  Pages

  11. Total Control

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.