All Curtain
14Pages

{{requestButtons}}

Catalog excerpts

All Curtain - 1

n m Solutio Total Syste Manual or Motorized 24 Volt DC Curtain System J&D Manufacturing’s DC Curtain System offers easy installation and trouble free operation. With the sealed keder curtain and matching roll tube, the J&D Curtain System can be installed in a fraction of the time compared to conventional curtain systems. ction Curtain System • End drive or center drive systems • Single roll up, double roll up, middle roll up, or middle double roll up • Fully adjustable for minimum winter ventilation or maximum summer ventilation • Curtain is wound tightly around the roll tube extending ng the life of your curtain, and eliminating the collection of n debris and habitat for rodents • 12 ounce clear polyethylene curtain has 20% more tensile and tearing strength than 10 ounce curtain • Unique design allows GREATER light penetration than n competitive curtains • Heat sealed curtain keder prevents tearing and fraying ng • Keder slides easily into the roll tube for quick installation on Drive Options • Manual drive with optional shepherd’s hook • Motorized climbing drives with built in adjustable limit switches and optional protective cable guide • 2 year warranty on motors Control Options • Manual control with power supply • Programmable control with thermostat, temperature sensor and power supply • Auxiliary multi stage ventilation control Wind Pockets and Restraints s • Heavy gauge galvanized wind pockets to protect your r drive system • Easy access service door • Optional wind pocket back panels • Exterior and interior wind pipe and strap options: - Galvanized steel round wind pipe - Galvanized steel square wind pipe - Aluminum rectangular wind pipe with protective rubber cushion Due to our continual effort to provide the best products available and adhere to market conditions; literature, products, prices and availability are subject to change without notice. www.jdmfg.com jdmfg@jdmfg.com

Open the catalog to page 1
All Curtain - 2

n m Solutio Total Syste Manual or Motorized 24 Volt DC Curtain System Curtain Styles End Drive Center Drive (maximum length 150’ * each side) Single Tier Single Tier Bottom Roll Bottom Roll Bottom Roll Single Tier Single Tier Single Tier Middle Roll* Top Tier Single Roll Single Tier Middle Roll* Middle Roll* Top Tier - Bottom Roll Top Tier - Bottom Roll Bottom Tier - Bottom Roll Bottom Tier - Bottom Roll Bottom Tier - Bottom Roll Top Tier - Bottom Roll Top Tier - Bottom Roll Top Tier - Bottom Roll Bottom Tier - Middle Roll* Bottom Tier Middle Roll Top Tier - Bottom Roll Bottom Tier - Middle...

Open the catalog to page 2
All Curtain - 3

n m Solutio Total Syste Curtain Material and Components Curtain Material J&D Manufacturing’s reinforced woven polyethylene curtain has a uniquely engineered coating for maximum durability and strength. Unlike sewn hems that can fray and unravel, J&D’s curtain has a heat sealed keder that will not separate. Features Top Tier Single Roll • 12 ounce clear polyethylene curtain with double stretching technology has 20% more tensile and tearing strength than 10 ounce curtain • Unique design allows GREATER light penetration than competitive curtains • Heat sealed curtain keder — not sewn or...

Open the catalog to page 3
All Curtain - 4

n m Solutio Total Syste Curtain Drives & Components Label: OA687_15A When using Do NOT use the manual Hammerdrill override: or Impact Driver ONLY use standard Do NOT drill on exceed low speed 150 and 10mm RPMs socket. Failure to adhere to these instructions will cause stripped gears and void motor warranty. 4 UNIT MANUAL CONTROL MANUAL / REMOTE 2 UNIT CONTROL WITH POWER SUPPLY Open or close only one unit at a time. Warning: Live voltage inside. Disconnect power before opening. Warning: Live voltage inside. Disconnect power before opening. Input: 115/230 Volt AC Primary Output: 24 Volt DC,...

Open the catalog to page 4
All Curtain - 5

n m Solutio Total Syste Curtain Wind Restraint Systems Shown is our most popular and recommended assembly. • Interior 12 gauge square windpipe with the PCSR617 curtain tube mounting bracket directly mounted, reducing the need for an additional cross member. • Exterior wind pipe is our rectangular aluminum extrusion with rubber cushion, reducing noise and curtain wear. Features Rectangular Wind Pipe with Rubber Cushion • Extruded aluminum 1”x1½” rectangular wind pipe with track for rubber cushion • Rubber cushion reduces noise and prolongs curtain life by reducing wear • 12’, 14’ and 16’...

Open the catalog to page 5
All Curtain - 6

n m Solutio Total Syste Curtain Wind Restraint Systems PCSR910-P Outside Mount Universal Bracket Round Wind Pipe System Part# Description ______________________________________________ Pipes ______________________________________________ PCSR914 Wind Pipe, 1⅝” Round x 14’, 18 Ga. Galv. ______________________________________________ PCSR915 Wind Pipe, 1⅝” Round x 16’, 18 Ga. Galv. ______________________________________________ Mounting Brackets ______________________________________________ PCSR910-P Bracket, Universal, Wind Pipe with Bottom Support...

Open the catalog to page 6
All Curtain - 7

n m Solutio Total Syste Curtain Wind Pockets Features Wind Pocket Sets • Heavy gauge galvanized drive pockets protect your drive system from the elements • Hinge and latch system on drive wind pocket door for quick access • Heavy gauge galvanized dead end covers to restrict side winds from lifting curtain • End drive sets include 1 drive end cover and 1 dead end cover Center drive sets include 1 center drive cover and 2 dead end covers • Wind pockets systems 13’ and taller are spliced systems for ease of operation, installation and maintenance Back Panel Sets - Optional • Used to protect...

Open the catalog to page 7
All Curtain - 8

n m Solutio Total Syste End Drive Curtain Wind Pocket Sets End Drive Wind Pockets Sets include 1 Universal Right/Left Dead End Cover 1 Universal Right/Left End Drive Cover with Hinged Door/s Assembly Hardware NOTE: Does not include installation hardware which must be ordered separately Max. Travel Optional Back Panel Sets Height Part# Description ______________________________________________ PCSR974-4 33.50” PCSR975-4 4’, End Drive Set ______________________________________________ PCSR974-5 45.50” PCSR975-5 5’, End Drive Set ______________________________________________ PCSR974-6 57.50”...

Open the catalog to page 8

All J&D Manufacturing catalogs and technical brochures

  1. All Exhaust

    21 Pages